How To Make Presentations; Presenting Material Such As Printed Matter And 3-Dimensional Objects; Presenting Slide Films - JVC AV-P1000U Operating Instructions Manual

HOW TO MAKE PRESENTATIONS

1. Presenting material such as printed matter and 3-dimensional objects

● Put an object on the stage and adjust the picture size with
1
the ZOOM buttons while checking the screen. When
the picture size is determined, adjust the focus with the
2
FOCUS buttons .
* When using in a room, it is recommended to turn on the
side illumination (for switching on the illumination, refer to
p. 13).
● When shooting a 3D object, use the 5-position camera arm
function to add presence to the picture.
While moving the camera arm in the direction shown
press the lock release button
arm in the direction shown
4
button to fix the arm at the lock position (5 steps).
● When capturing the image of a large object such as the
page of an encyclopedia, pull out the book holder in the
6
direction shown .
Notes:
● Do not apply excessive force to the book holder.
● Do not release the camera arm when the lock release
button is pressed. Otherwise, a malfunction or injury
may result.

2. Presenting slide films

Turn on the side illumination and insert the film into the slide
7
film holder . Then, adjust the size of the picture with the
1
ZOOM buttons . When the picture size is determined, ad-
just the focus with the FOCUS buttons
● To use the slide film holder, turn the side illumination on
and direct the fluorescent lamp down.
● If the slide film (vertical) is magnified until the mount sec-
tion can no longer be seen, focusing is not possible. Use
the zoom at the tele side.
● Do not put any objects on the stage.
8
3
4
. Then, move the camera
5
and release the lock release
2
.
!
ON-SCREEN ADJUSTMENTS
LIGHTS IRIS MENU/ENTER
VIDEO PC FREEZE AUTO WHITE
OUT
,
3
4
6
FOCUS ZOOM
1 PRESET
TELE
NEAR FAR DIGITAL
SET
2
5
7
2
WIDE
1
6