Electrolux ECCI3668AS Service Data Sheet

NOTICE - This service data sheet is intended for use by persons having electrical
and mechanical training and a level of knowledge of these subjects generally
considered acceptable in the appliance repair trade. The manufacturer cannot
be responsible nor assume any liability for injury or damage of any kind arising
from the use of this data sheet.
SAFE SERVICING PRACTICES
To avoid the possibility of personal injury and/or property damage, it is important
that safe servicing practices be observed. The following are examples, but without
limitation, of such practices.
1. Before servicing or moving an appliance remove power cord from electrical outlet,
trip circuit breaker to OFF, or remove fuse.
2. Never interfere with the proper installation of any safety device.
IMPORTANT
DO NOT REMOVE THIS BAG
OR DESTROY THE CONTENTS
WIRING DIAGRAMS AND SERVICE
INFORMATION ENCLOSED
REPLACE CONTENTS IN BAG
p/n A00498610 Rev A (1120)
SERVICE DATA SHEET
36" INDUCTION COOKTOP
3. GROUNDING: The standard color coding for safety ground wires is GREEN or
GREEN WITH YELLOW STRIPES. Ground leads are not to be used as current
carrying conductors. It is extremely important that the service technician
reestablish all safety grounds prior to completion of service. Failure to do
so will create a potential safety hazard.
4. Prior to returning the product to service, ensure that:
• All electric connections are correct and secure.
• All electrical leads are properly dressed and secured away from sharp edges,
high-temperature components, and moving parts.
• All uninsulated electrical terminals, connectors, heaters, etc. are adequately
spaced away from all metal parts and panels.
• All safety grounds (both internal and external) are correctly and securely
reassembled.
Electronic Surface Element Control (ESEC)
This cooktop is equipped with an Electronic Surface Element Control (ESEC),
which precisely controls the smoothtop cooking elements at multiple settings.
For the user, the elements are operated by the electronic slider controls. The
control settings are shown in single-digit displays.
Hot Surface display message - If any of the induction elements are hot, the hot
surface message (Hot) will display and remain ON until the cooktop cools.
Replacing an induction element
Whenever replacing any induction element, use only the screws supplied with
the range to secure the element to the mounting panel. Never use any other
type of screw to attach the induction element.
* Please note: Electronic boards are very sensitive to static electricity. Static
electricity can permanently damage electronic boards. Before handling these
parts, be sure to drain static electricity from your body by properly grounding
yourself.
BL001
BL002
BN002
BN001
BC002
BPE03
TAB201
BT200
TAB202
BC003
BC004
BC005
BS003
BC001
TAB101
BT100
TAB102
Indicated % Power Notes
0 0 Off
1 3 Keep Warm
2 6 Low
3 10 Medium Low
4 15 Medium Low
5 20 Medium
6 30 Medium
7 45 Medium High
8 65 Medium High
9 100 High
MAX >140 Power Boil
POWER
SERVICE AND MENU MODES
NOTE: Have instructions ready and plan the steps. The time allowed for each
step is brief.
MAIN POWER KEY
LOCK KEY
ON MAX ON MAX
OFF OFF
POWER
TIMER KEY SERVICE KEY
(only visible in (Precision Temp
service modes) Control Key)
ON MAX ON MAX ON MAX ON MAX
OFF OFF OFF OFF
POWER
Display Mode
d demo mode off
do demo mode on
S1 service mode, software version check
S4 service mode, power check
Enter/Exit Menu mode:
1. Touch and HOLD the main power key until the illuminated service
POWER
key appears (right illuminated PTC indicator ).
2. Within three seconds, touch the and HOLD the illuminated service key
for three seconds.
3. The cooktop will enter Menu mode, and a code will appear in the timer
display. The code may be "d", "do", "S1", or "S4".
4. To exit Menu mode, do not touch any control for 20 seconds. The cooktop
will exit menu mode automatically after 20 seconds.
Activate/Deactivate Demo mode:
1. Enter Menu mode, and a code will appear in the HOT display.
2. Touch the Timer key to cycle through the options until "do" displays. This
activates Demo mode.
3. Press the + key until "d" displays. This deactivates Demo mode.
Enter/Exit Service mode:
1. Enter Menu mode, and a code will appear in the HOT display.
2. Touch the Timer key to cycle through the options until "S1" displays.
3. Touch the + key to enter Service mode. The display shows the last two digits
of the software version.
4. Touch the Timer key to cycle through the options until "S4" displays.
5. Place a piece of cookware in a cooking zone.
6. Touch the + key to start the power check. The display shows "P0" to "P9". P6
or less is a bad check; P7 or higher is a good check. P9 is 90-100% power.
Enter/Exit Error mode:
1. Touch and HOLD the main power key until the illuminated
POWER
lock key appears.
2. Within three seconds, touch the and HOLD the illuminated lock key
three seconds.The cooktop will enter Error mode.
3. Touch the Timer key to cycle through the options until "E" displays.
4. Touch the + key to enter Error mode.
5. The last 5 error codes will display for 5 seconds each. If the display shows
only "E", there are no errors in the appliance's memory.
ON MAX
OFF
for