Related Manuals for Siemens SISTORE AX4
Summary of Contents for Siemens SISTORE AX4
- Page 1 CCTV SISTORE AX4 Quick Start Guide Fire & Security Products Siemens Building Technologies...
-
Page 2: Ce Declaration Of Conformity
EC directive has been proven by testing according to the standards EN 50130-4 (EN 61000-2, -3, -4, -5, -6 and -11) for noise immunity and EN 55022 Class A for emitted interference. Siemens Building Technologies Fire & Security Products... -
Page 3: Installation
INSTALLATION The SISTORE AX4 is designed to work a variety of other equipment. The basic system will consist of a video camera and system monitor. Refer to the User’s Manual CD (see directory: Documentation) for details of installing each type of equipment. -
Page 4: Operation
OPERATION Turning on the Power The SISTORE AX4 is operational in approximately 60 seconds after the power cable is connected to the system. The Power LED on the front panel will turn ON, and this action signifies the system has been turned on properly. The SISTORE AX4 may be powered down by unplugging the power cord at the rear of the system. -
Page 5: Front Panel Buttons And Leds
Illuminates when the system is in the setup mode. QUAD/SEQ Illuminates when the system is in the sequence mode. Illuminates when the system is in the PTZ mode. PANIC Illuminates when the system is in the panic recording mode. Siemens Building Technologies Fire & Security Products... -
Page 6: System Setup
Press MENU button on the front panel and enter the password (default: 4321) using camera buttons (1-4). As well as the Normal Setup, the SISTORE AX4 also supports the Quick Setup for system programming. The factory default is the Quick Setup. Refer to User’s Manual for the setup instructions in detail.