Main Units; Feed Unit - Canon PD-82K Service Manual

III. MAIN UNITS
A. Feed unit
1) Open the feed unit.
2) Disconnect the 3 connectors
3) Slide the 2 feed spacers in the direction
of the arrow.
4) Remove the 2 screws and the feed unit.

Feed unit

Connectors
Screws
Feed spacers
Figure 3-3-1
B. Pick-up unit
1) Remove the rear cover and the right
cover.
2) Remove the feed unit according to the
feed unit removal procedures on page 3-
5.
3) Disconnect the connector and then
remove the cable from the cable guide.
Connector Cable
Cable guide
Figure 3-3-2
4) Remove the cable from the cable guide,
remove the 6 screws, and then pull out
the pick-up unit toward you.
Cable Cable guide
Screws Pick-up unit
Figure 3-3-3
CHAPTER 3
3 - 5