Reset Resource Assignments; Load Default Settings; Abort Settings Change; Exiting Setup - Acer V66LT Technical Manual

Reset Resource Assignments

This field specifies whether the configuration data is reset and reinitialized when the system is
started.
After the system is started, the configuration data is reset, and the entry in this field
Yes
is set to No. The new configuration data is determined by means of the Plug&Play
functionality. The mounted boards and drives are then initialized with this data. Non-
Plug&Play components must be entered manually.(e. g. in Windows 95, ICU).
After the system is started, the Plug&Play functionality ascertains the current
No
configuration data and uses this data to initialize the installed boards and drives. The
configuration data of non-Plug&Play components are not reset.

Load Default Settings

You need to reload the BIOS default settings every time you make changes to your system
hardware configuration (such as memory size, CPU type, hard disk type, etc.); otherwise, BIOS will
keep the previous settings.
After selecting Load Default Settings the following dialog box appears:
Selecting Yes enables BIOS to detect the new default values. Selecting No returns you to the main
menu without loading the default settings.

Abort Settings Change

After selecting Abort Settings Change the following dialog box appears:
Select Yes to discard all changes. Selecting No returns you to the main menu and the changes
remain effective.

Exiting Setup

To exit BIOS Setup press the [Esc]
A26361-K522-Z122-3-7419
Do you want to load default settings?
Yes
Do you want to abort settings change?
Yes
[Esc] key in the main menu. Confirm the following dialog box.
[Esc] [Esc]
No
No
BIOS Setup
English - 31