Included Accessories; Installation Dimensions Of Locking Bolt; Installing The Range With The Anti-Tip Device - Miele HR 1124-3 AG Installation Instructions Manual

Included accessories

- 1 anti-tip device
- 4 screws
- 4 plugs
Installation dimensions of
locking bolt
Anti-tip device, front view
Model
HR 1124-3 29 15/16"
HR 1421-3*
(762 mm)
HR 1622-3
HR 1724-3
HR 1924-3
HR 113x-3 35 15/16"
HR 193x-3
(915 mm)
HR 195x-3 47 15/16"
(1,220 mm)
* Only available in Canada.
Installing the Range with the
anti-tip device

Wear safety shoes and gloves.
The anti-tip device should be installed
at the bottom rear of the Range at the
midpoint of the width.
 Measure the installation space for the
Range close to floor level.
Width X
3 13/16"
(97 mm)
3 13/16"
(97 mm)
3 1/4"
(82 mm)
 Mark the wall at the middle of the
space width.
 Position the notch of the anti-tip
device on the wall marking.
The anti-tip device must fit tightly on
the floor or the wall.
2
1
3
Attaching to the floor
2
1
3
Attaching to the wall
a Anti-tip device
b Screws
c Locking nut
Anti-tip device
99