Advertisement
8
THE CONTROLS & OPERATION
Filling water:
For cooling function, please add
water into the water tank. Before
adding water, please open the water
tank lock, take the water tank out
and add water in it slowly (Figure 1, 2,
3 and 4): put the water tank to the
original location after adding water
and lock the water tank lock.
Water tank Locked (Fig. 1)
Water tank Unlocked (Fig. 2)
Water tank pulled out (Fig. 3)
Filling water (Fig. 4)
For manual water filling, please note
the level indicator in the front of the
air cooler (Fig. 3).
1. Do not fill the water exceeding
the maximum water level (Fig. 3).
2. Be sure to use clean water.
3. Tip: It is normal, non-toxic, and
will not affect your health if the
device has slight odor or the
water in the tank has a slight
discoloration when it is used for
the first time.
Advertisement
