Sensor Buttons - Miele H 7640 BM Operating And Installation Instructions

Control panel

Sensor buttons

The sensor buttons react to touch. Every tap of a sensor button is confirmed with
an audible keypad tone. You can turn this keypad tone off by selecting the
Keypad tone | Off setting.
If you want the sensor buttons to respond even when the oven is turned off,
select the Display
Sensor button Function
Remote
Minute +
Back
Timer
Light
24
| QuickTouch | On
If you want to control the oven from your mobile device, you
must have the Miele@home system, turn on the
setting, and tap this sensor button. The sensor button then lights
up and the MobileStart function is available.
As long as this sensor button is illuminated, you can control the
oven via your mobile device (see "Settings – Miele@home").
Use this sensor button to start the
cooking process runs with the maximum power level (level 7)
and a cooking duration of 1 minute (see section "Quick MW").
Touching the sensor button repeatedly increases the cooking
duration in increments.
This function can only be used when no other cooking processes
are in use.
Depending on which menu you are in, this will take you back a
level or back to the main menu.
If a menu appears on the display or if a cooking process is in
progress, you can use this sensor button to set a timer (e.g.,
when boiling eggs) or an alarm (a specific time) at any point (see
"Alarm + timer").
Select this sensor button to turn the oven interior lighting on and
off.
Depending on the setting selected, the oven interior lighting
turns off after 15 seconds or remains constantly turned on or off.
setting.
Remote Control
Quick MW function. The
Volume |