Advertisement
fig.4
4.4
Fingerprint registration. Press the finger print initialization/add
button which is situated on the back edge of the open door. See
fig.4. two beeps will be heard and a red light will illuminate in the
finger registration window.
4.4.1 Immediately position a suitable finger on the window and hold it
steady with medium pressure. refer to fig.5 for information on
correct finger placement. two beeps registers the presence of
your finger. continue to hold your finger in place. A long beep will
signal successful finger print registration. Each user should
register 2 to 3 fingerprints.
4.4.2 If 3 short beeps are heard accompanied by flashing LEDs the
registration has failed. refer to fig.5 for information on incorrect
finger placement which may account for non-registration.
4.4.3 tips to further improve finger print recognition are as follows:-
● Do not attempt registration or recognition in bright light.
● Do not press too hard or too lightly on the window.
● females and children should register with their thumb or middle
finger.
● In very dry weather, registration or recognition may be
improved by creating a little moisture on the finger tip by
breathing on it prior to placement.
4.5
Opening the safe.
4.5.1 fInGErPrInt oPEnInG. Press the unlock button to turn on the
red light in the finger print recognition window. Place your finger
onto the window as instructed in section 4.4 and leave it in
position until a beep is heard and the green LED illuminates. You
can now open the door.
4.5.2 uSEr coDE oPEnInG. Input your user code and then press
the unlock button. If it is the correct code a beep is heard and the
green LED illuminates. You can now open the door.
4.5.3 EMErGEncY KEY oPEnInG. the safe can be opened with the
emergency key by following the instructions in section 4.1. Do
not keep the emergency keys in the safe.
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMpORTaNT: no liability is accepted for incorrect use of this product.
WaRRaNTy: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INfORMaTION: for a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
4.6
4.7
4.7.1 Do not spill liquids on the control panel.
4.7.2 Do not attempt to dismantle the control panel or any other door
4.8
4.8.1 Should you lose your keys we can supply replacements. to
fig.5
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7Ar
Original Language Version
Restoring the factory settings. open the safe to access the
initialization/add button. Press and hold down the button. After
about 5 seconds the green LED will start to flash. continue to
hold down the button whilst the LED flashes about ten times,
followed by a beep. All finger print records are deleted and
the user code is returned to '1234'.
Maintenance. Do not use liquids or spray cleaners to clean the
safe. use only a damp cloth.
mounted components. If the safe malfunctions return it to your
Sealey dealer.
Replacement Keys.
order these please contact our sales office on 01284 757500
and quote the unique serial number relating to your safe, this
can be found on the front of this manual. We will also require a
copy of your purchase invoice for the safe to confirm that you
are the owner. Please note that replacement keys are special
order only (we do not carry these in stock for security reasons)
and as such they can take 14 – 28 days to arrive.
sBs03 350 x 310 x 500
01284 757500
01284 703534
www.sealey.co.uk
Web
sales@sealey.co.uk
email
SBS01, SBS03
Issue: 1 - 31/10/11
Advertisement
