Engine Control System; Alert System; Overheat Alert; Low Oil Pressure Alert - Yamaha F200 Owner's Manual

EMU26804

Alert system

ECM00092
NOTICE
Do not continue to operate the engine if a
alert device has activated. Consult your
Yamaha dealer if the problem cannot be
located and corrected.
EMU26828

Overheat alert

This engine has the overheat alert device. If
the engine temperature rises too high, the
alert device will activate.
 The engine speed will automatically de-
crease to about 2000 r/min.
 The overheat-alert indicator will light or
blink.
 The buzzer will sound.

Engine control system

If the alert system has activated, stop the en-
gine and check the cooling water inlets:
 Check trim angle to be sure that the cooling
water inlet is submerged.
 Check the cooling water inlet for clogging.
Dual engine drive users:
If the overheat-alert system of one engine ac-
tivates, the engine will slow down. To switch
off the alert activation on the engine not af-
fected by overheating, turn off the main
switch of the engine overheating. If the alert
system has activated, stop the engine and tilt
the outboard motor up to check the cooling
water inlet for clogging. If the alert system has
still activated, tilt the overheated outboard
motor up and return to the port.
ZMU01757
EMU35026

Low oil pressure alert

If the oil pressure drops too low, the alert de-
vice will activate.
 The engine speed will automatically de-
crease to about 2000 r/min. The low oil
pressure-alert indicator will light or blink.
ZMU04583
ON ON
OFF START OFF START
ZMU05827
45