Setting Up The Monitor Unit - Panasonic KX-HN3051C Operating Instructions Manual

Getting Started

Setting up the monitor unit

Battery installation
R USE ONLY the specified battery.
1
Remove the screw from the battery cover.
2
Remove the battery cover.
3
Insert the battery.
BLK: black
1
RED
2
2
1
4
Insert the tabs (A) into the slots, and
then close the battery cover (B).
2
For assistance, visit www.panasonic.ca/english/support
14
HN3051C̲(en̲en)̲0228̲ver.040.pdf 14
5
Battery charging
1
2
Charge for about 8 hours.
Note:
R Use only the supplied AC adaptor
R When the AC adaptor plug is connected to
R It is normal for the monitor unit to feel warm
R The monitor unit resets if the AC adaptor is
1
Drive the screw into the battery cover.
R Follow the directions on the display
to set up the unit.
Insert the AC adaptor plug (A) firmly into
the monitor unit's micro-USB connector.
Connect the AC adaptor (B) to the power
outlet.
B
S006AKU0500100.
the monitor unit's micro-USB connector,
is displayed on the screen.
during charging.
disconnected when charging.
A
2018/02/28 16:25:28