Go/No Go Testing; Antenna Coupler C6502 And L35H No Lte; Antenna Coupler C6503 And C6506 All Bands - Sony Xperia ZL Test

1

Go/No Go Testing

This Go/No Go testing has to be carried out in two ways, with an:
• Antenna Coupler.
• Cable in shield box.
For more information on Antenna Coupler and Cable in shield box testing, refer to
1220-1336: Generic Repair Manual – electrical, section 'Setup Go/NoGo Test'!
For part no's on the equipment below, refer to the 'Tools Catalogue/Matrix'!
1.1
Antenna Coupler C6502 and
L35h no LTE
The following equipment has to be used:
• Rohde & Schwartz RF Shield Package
- Rohde & Schwartz RF Shield Box CMU-Z11
- Rohde & Schwartz RF Coupler
- Grid Positioning Holder
• RF Test Cable Flexible 1M
• RF Adapter for RF Shield Box
• Micro USIM Card, instrument specific
GSM-850/900/1800/1900
WCDMA-850/900/1700/1900/2100
Put the grid positioning holder with its reference point in
position F12 and place the phone as shown in the adjacent
picture.
1.2
Antenna Coupler C6503 and
C6506 all bands
The following equipment has to be used:
• Rohde & Schwartz RF Shield Package
- Rohde & Schwartz RF Shield Box CMW-Z10
- Rohde & Schwartz RF Coupler CMW-Z11
- Grid Positioning Holder
• RF Test Cable Flexible 1M
• RF Adapter for RF Shield Box
• Micro USIM Card, instrument specific
GSM-850/900/1800/1900
WCDMA-850/900/1700/1900/2100
LTE-Band 1/2/3/4/5/7/8/17/20
Put the grid positioning holder with its reference point in
position J16 and place the phone as shown in the adjacent
picture.
1271-7743 Rev 1

Sony Mobile Communications AB – Company Internal
Test and Calibration (elec)
A B C D E F G H I J K
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
A B C D E F G H I J K
L M N O P Q R
25
24
23
22
21
20
19
18
17
16
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
L M N O P Q R
3(10)