Disassembly
3.1
Back Cover Assy
Open the Cover Card.
SIM card and Memory Card needs to be removed!
Unfold the label to remove the 2 Screw 3.0 by using a
screwdriver with Bits (JCIS No 0).
Scrap! Not to be reused!
Insert a Guitar Pick as shown in picture loosen the adhesive
along the right side according to the picture.
Unlatch the 3 snaps with a Guitar pick.
Stop at the red line (5mm below the Flash LED) to avoid
damage on hidden flex!
Gently break open the Back Cover Assy with a counter
clockwise movement.
Gently rub with a Nylon Pointer to remove the Adhesive
Backcover.
Remove and clean any remaining adhesive residue
found on Back Cover Assy and Front Assy Unit
1271-7733 Rev 2
Sony Mobile Communications AB – Company Internal
Working Instruction (mech)
8(76)