Sharp LC-60LE651 MK2 Service Manual

Sharp LC-60LE651 MK2 Service Manual

60” led lcd colour television

Advertisement

Wi-Fi & 3D Ready / DVB-T / T2 / C / S / S2 PAL
ELECTRICAL SPECIFICATIONS ........................................................................................ 2
IMPORTANT SERVICE SAFETY PRECAUTIONS ......................................................................... 3
OPERATION MANUAL ....................................................................................................................
DIMENSIONS .................................................................................................................... 22
REMOVING OF MAJOR PARTS ..................................................................................................... 23
SERVICE ADJUSTMENTS ............................................................................................................. 27
PUBLIC MODE .................................................................................................................................... 38
SOFTWARE UPGRADING ............................................................................................................. 42
MAJOR ICs INFORMATION ..................................................................................................... 43
BLOCK DIAGRAMS ..................................................................................................................... 59
SCHEMATIC DIAGRAMS ....................................................................................................... 62
PRINTED WIRING BOARDS ......................................................................................................... 101
REPLACEMENT PARTS LIST ....................................................................................................... 111
CABINET AND MECHANICAL PARTS ............................................................................................ 121
PACKING OF THE SET ....................................................................................................................... 123
SHARP CORPORATION
SERVICE MANUAL
LED LCD
COLOUR TELEVISION
/ SECAM
B/G, I
B/G, D/K, L/L'
MODELS
LC-60LE651E/K MK2
LC-60LE652E
In the interests of user safety (required by safety
regulations in some countries) the set should be re-
stored to its original condition and only parts identical
to those specifi ed should be used.
CONTENTS
1
LC-60LE651 MK2
LC-60LE652 MK2
SE0060LE651MK
10
Issued:
SYSTEM COLOUR TELEVISION
This document has been published to
be used for after sales service only.
The contents are subject to chage without notice.
Sept 2014
th
MK2
6

Advertisement

Table of Contents
loading

Summary of Contents for Sharp LC-60LE651 MK2

  • Page 1: Table Of Contents

    LC-60LE651 MK2 LC-60LE652 MK2 SERVICE MANUAL SE0060LE651MK Issued: Sept 2014 LED LCD COLOUR TELEVISION Wi-Fi & 3D Ready / DVB-T / T2 / C / S / S2 PAL / SECAM SYSTEM COLOUR TELEVISION B/G, I B/G, D/K, L/L’ MODELS...
  • Page 2: Electrical Specifications

    LC-60LE651 MK2 LC-60LE652 MK2 ELECTRICAL SPECIFICATIONS Specifications 60” LCD COLOUR TV, Models: Item LC-60LE651E/K (MK2) LC-60LE652E (MK2) LCD Panel (LED TV) 60”/ 152cm BLACK TFT Resolution 6.220.800 dots (1.920 x 1.080 pixels) Video Colour System PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 TV Standard Analogue CCIR (B/G, I, D/K, L/L’)
  • Page 3: Important Service Safety Precautions

    LC-60LE651 MK2 LC-60LE652 MK2 IMPORTANT SERVICE SAFETY PRECAUTION Service work should be performed only by qualifi ed service technicians who are thoroughly familiar with all safety checks and the servicing guidelines which follow: WARNING 1. For continued safety, no modifi cation of any circuit should be attempted.
  • Page 4 LC-60LE651 MK2 LC-60LE652 MK2 PRECAUTIONS FOR USING LEAD-FREE SOLDER 1 Employing lead-free solder “ALL PWB” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The alphabetical character following LF shows the type of lead-free solder.
  • Page 5 If the product is used for business purposes and you want to discard it: Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
  • Page 6: Operation Manual

    LC-60LE651 MK2 LC-60LE652 MK2 OPERATION MANUAL Remote control unit NET (Page 37) 14 ATV/DTV Access “AQUOS NET+” mode. Access TV mode. Alphanumeric buttons 0_9 RADIO DTV/SAT: Switch between radio and Set the channel. Enter desired numbers. Set the page in teletext data mode.
  • Page 7 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) TV (Front view) Illumination led* Input Menu Power Remote 3D infrared Programme (channel) Volume source button button Control emitter buttons buttons button Sensor *TV indicator status (Page 17) TV (Side and rear view)
  • Page 8 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Inserting the batteries Before using the TV for the first time, insert the two supplied “AAA” size batteries. When the batteries become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
  • Page 9 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection. Power on and...
  • Page 10 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Connecting external devices Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maximise the potential of the TV and the connected device.
  • Page 11 The copyrights for the software components and various relevant documents included with this product that were developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws. This product also makes use of freely distributed software and software components whose copyrights are held by third parties.
  • Page 12 Use an ETHERNET cable to connect the LAN terminal • When using the SHARP wireless LAN adapter, try to provide on the TV to your broadcast router as shown below. as much free space around the device for best performance.
  • Page 13 Connect the AN-WUD630 USB adapter to the USB Wi-Fi port on the TV. • Do not use a wireless LAN adapter other than the AN- WUD630 Sharp wireless LAN adapter, as operations cannot be guaranteed. Select Enter access point manually and press •...
  • Page 14 • Even in opern web-mode, users cannot download and save side (3). fi les or install plugins. DISCLAIMERS • SHARP Corporation bears no responsibility regarding the content and quality of the content provided by the content service provider.
  • Page 15 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) TV menu options After searching for a specific term, the results are Apps can be re-arranged by the user: categorized by their type (1), including the number 1 Move the cursor to the application that shall be moved.
  • Page 16 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Quick guide Select broadcast settings. Initial auto installation Press to move between different tune type. Press OK to select the desired antenna. When the TV is powered on for the first time after purchase, the initial auto installation wizard appears.
  • Page 17 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Quick guide Supplying power to the antenna. NOTE If you use a DVB-T antenna that requires a supply voltage • The value of Frequency and Network ID should and which is not supplied via a power adapter, then select be set to the value specified by the cable provider.
  • Page 18 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Quick guide Setting options for 2 satellites on 22kHz Setting options for Single satellite switchbox / 2 satellites on Toneburst switch Reception of a single satellite via a connected LNC 1 Select Satellite1/Satellite2 (LNB).
  • Page 19 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Quick guide Repeat rate Setting options for DiSEqC one cable The refresh rate determines how often a DiSEqC communal system command is output. A refresh is only necessary with cascaded system. 1 Select which DiSEqC single cable system you are Control voltage using and press OK.
  • Page 20 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Quick guide Scrambled stations Setting options for Other communal installation Select yes to save all scrambled stations. • These stations can only be received in connection 1 Select satellite. with a CI module and the appropriate CA Card.
  • Page 21 LC-60LE651 MK2 LC-60LE652 MK2 Operation Manual (Continued) Quick guide Positioning / aligning DVB-T antenna If you install a DVB-T/T2/S/S2 antenna for the first time or relocate it, you should adjust the alignment of the antenna to receive a good reception while checking the antenna setup screen.
  • Page 22: Dimensions

    LC-60LE651 MK2 LC-60LE652 MK2 DIMENSIONS (91) (41) [110] [41] [(132)] [(41)] (881) / [1123] / [(1368)] (859) / [1100] / [(1335)] (470) / [470] / [(584)] (253) / [301] / [(351)] (200) / [400] / [(400)] 60”: [( )]...
  • Page 23: Removing Of Major Parts

    LC-60LE651 MK2 LC-60LE652 MK2 REMOVING OF MAJOR PARTS REMOVING OF MAJOR PARTS 1. Removing of major Parts 60” 1.1. Remove the 4 lock screws and detach the Stand. 1.2. Remove the 19 lock screws , 1 lock screw , 1 lock screw...
  • Page 24 LC-60LE651 MK2 LC-60LE652 MK2 1. Removing of major Parts 60” (Continued) 1.4. Remove the 4 lock screws and detach the POWER unit. 1.5. Remove the 4 lock screws and detach the MAIN unit. 1.6. Remove the 1 lock screw and detach the chassis BRACKET.
  • Page 25 LC-60LE651 MK2 LC-60LE652 MK2 1. Removing of major Parts 60” (Continued) 1.8. Remove the 16 lock screws ⑪ and detach the stand BRACKET. 1.9. Remove the 2 lock screws ⑫ and detach the control button HOLDER. 1.10. Detach the KEY unit ⑬ and the pyramid lighting DIFFUSER ⑭.
  • Page 26 LC-60LE651 MK2 LC-60LE652 MK2 1. Removing of major Parts 60” (Continued) 1.11. Detach the LCD module ⑮ from the front CABINET 1.12. Remove the 6lock screws ⑯ and detach the CONTROL unit from the LCD module. front CABINET module CONTROL...
  • Page 27: Service Adjustments

    4. “SERVICE MENU” appears (see Figure 1). 5. Press ◄/► cursor to select the desired function. 6. Press “OK on boxes to go to submenu. 7. Press “6” to return to “SHARP FACTORY” Main Menu. 8. Press”END” or “MENU” to exit of adjustments mode.
  • Page 28 LC-60LE651 MK2 LC-60LE652 MK2 3. Remote control key operation in Service Mode (Adjustment process mode). Remote Control key Keyboard unit Function Cursor (◄/►) Moving an item by one (LEFT/RIGHT) on “Service Menu”. Moving an item by one (LEFT/RIGHT) on SubMenus.
  • Page 29 LC-60LE651 MK2 LC-60LE652 MK2 4. Description of display (continued) Service Menu SubMenu Options 1 Options 2 Comments System Data Package 0.1.18.1 MAIN VERSION Main System 1.18.0.0 1.18.0.0 1.18.0.0 Main Bootloader 0.93.2.0 Standby 0.0.23.2 Controller 0.0.0.0 STM8 VERSION WiFi Module Don’t use...
  • Page 30 LC-60LE651 MK2 LC-60LE652 MK2 4. Description of display (continued) Service Menu SubMenu Options 1 Options 2 Comments NoAutoPowerOff 0: auto power off enabled (4h, without sync) 1: all auto power off functions disabled NoWSS Disable wide screen signaling (WSS) evaluation...
  • Page 31 LC-60LE651 MK2 LC-60LE652 MK2 4. Description of display (continued) Service Menu SubMenu Options 1 Options 2 Comments WarmupMode 0: normal operation 1: automatically switch on after power on Station List Station Import Insert USB Flash memory to import a station map from external file.
  • Page 32 LC-60LE651 MK2 LC-60LE652 MK2 4. Description of display (continued) Service Menu SubMenu Options 1 Options 2 Comments Import EPG Import external EPG database from database USB file. Export EPG Export EPG internal database database to a USB file. PQ Settings Don’t use...
  • Page 33 LC-60LE651 MK2 LC-60LE652 MK2 4. Description of display (continued) Service Menu SubMenu Options 1 Options 2 Comments to adjust Variable Input mode fixed Variable and “OK” to fix Fixed value to adjust and “OK” to fix RC path through value...
  • Page 34 LC-60LE651 MK2 LC-60LE652 MK2 4. Description of display (continued) Service Menu SubMenu Options 1 Options 2 Comments MGAMMA IN B1 0...4096 to adjust color temp. MGAMMA IN R2 0...4096 to adjust 1189 color temp. MGAMMA IN G2 0...4096 to adjust 1228 color temp.
  • Page 35 LC-60LE651 MK2 LC-60LE652 MK2 4. Description of display (continued) Service Menu SubMenu Options 1 Options 2 Comments Erase NVM OK: 0 Press “OK” to erase NVM OK: 0 Press “OK” to Set Auto setup Installation Autoinstallation flag LCD controller No test Pattern...
  • Page 36 LC-60LE651 MK2 LC-60LE652 MK2 6. White Balance Adjustment Condition: ● AV MODE= Dynamic (backlight at max.). ● Select correct Inch setting (39”,50” or 60”) in “Inch setting” menu. ● Adjustments reference device: Minolta CA-210 ● Adjustments target: x=0.274, y=0.284 High: adjustments spec ±0.001, inspection spec: ±0.002 Low: adjustments spec ±0.002, inspection spec: ±0.004...
  • Page 37 LC-60LE651 MK2 LC-60LE652 MK2 7. Initialization to factory setting Caution: When the factory settings have been made, all user setting data, including the channel settings, are initial- ized. The adjustments done in the adjustment process mode are not initialized. Keep this in mind when initializing these settings.
  • Page 38: Public Mode

    LC-60LE651 MK2 LC-60LE652 MK2 9. Public Mode (Hotel mode) 9.1. How to Enter in the Public Mode (Hotel Mode). There are two following ways to display the Public Mode setting screen. Method 1: Turn on the power and enter in the Service mode as usual and select [PUBLIC MODE].
  • Page 39 LC-60LE651 MK2 LC-60LE652 MK2 9. Public Mode (Hotel mode) ( continued ) 10. INPUT TV MODE PROGRAM NUMBER [1-999] If value is “0”, TV should start in the last program number selected by user if in the previous control ATV / DTV is selected, this is the normal user TV behavior.
  • Page 40 LC-60LE651 MK2 LC-60LE652 MK2 10. SMART LOADER Description. The Smartloader is a function implemented in the service software of SEE designed LE750 series intended to eas- replicate the user settings of one TV into another. These settings include (but not restricted to): picture and audio, tuning set-up, language and country selection, PIN, child locked programs…...
  • Page 41 LC-60LE651 MK2 LC-60LE652 MK2 RS-232 Terminal Software You should open a connection between a computer and the TV set, for this reason you need a RS-232 terminal application. You can use the “Hyperterminal” included with any Windows release, but also you can use TeraTerm as freeware application (http://ttssh2.sourceforge.jp/index.html.en).
  • Page 42: Software Upgrading

    Software update via USB If an Internet connection is available, new software can It is possible to update the software on your SHARP TV. be downloaded directly and installed in the TV set. Add the binary file to USB memory root.
  • Page 43: Major Ics Information

    LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION 1. General ICs Information DUNTKF135WE (Main Unit) IC 1505: HDMI Switch 3 inputs to 1 output. Part number: BU16028KV (ROHM) Sharp code: VHIBU16028K-1Q http://www.rohm.com/products/databook/video/pdf/bu16006kv-e.pdf Features: Supports 2.25 Gbps Signaling Rate for 480i/p, 720p, and 1080i/p Resolution to 12-Bit Color Depth.
  • Page 44 Selectable clock input ratio. 96-kHz internal processing sample rate. Thermal overload and short-circuit protection technology Video apps: 576 x fs input mode supported. IC 2702: Headphone Amplifier. Part number: TS488IQT (ST MICRO) Sharp code : RH-IXD542WJZZY. http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00083715.pdf Ω Ω Ω Features: Pop and click noise protection circuitry.
  • Page 45 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) IC 3501, IC3502 & IC 3503: 2Gb 16Bits DDR3-1600 SDRAM Part number: MT41J128M16JT-125:K (MICRON) Sharp code: RH-IXD538WJZZQ http://www.micron.com/~/media/Documents/Products/Data%20Sheet/DRAM/2Gb_DDR3_SDRAM.pdf DDR3 SDRAM uses double data rate architecture to achieve high-speed operation. The double data rate architecture is an 8n- prefetch architecture with an interface designed to transfer two data words per clock cycle at the I/O pins.
  • Page 46 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) IC9551: Adjustable Current Limited Load Switch with Fault Flag (USB1). Part number: AAT4614IGU-2-T1 (SKYWORKS INC.) Sharp code: RH-IXD309WJZZY http://www.skyworksinc.com/uploads/documents/201939A.pdf The AAT4614 Smart Switch is a current limited P-channel MOSFET power switch designed for high side load switching applications.
  • Page 47 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) IC 3301: SOC Freeman Premier 2 Part number: FLI7560-AAB (ST MICRO) Sharp code: RH-IXD514WJZZQ http://www.st.com/st-web-ui/static/active/en/resource/technical/document/data_brief/DM00063486.pdf The FLI7560 is a revolutionary new iDTV SoC that integrates two highly successful, market proven subsystems: STi710x digital/front-end processing and multi-format audio/video decoding from the STB market, and Faroudja video/back-end processing from the TV market.
  • Page 48 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) IC 3800: STANDBY CONTROLLER Part number: STM8S105K4T6CTR (ST MICRO) Sharp code: RH-IXD550WJZZY http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00200092.pdf Features Core. 16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline. Extended instruction set. Memories.
  • Page 49 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) IC8401: 2Gbit NAND FLASH Part number: MT29F4G08ABADAWP:D (MICRON) Sharp code: RH-IXD552WJQZQ http://datasheet.elcodis.com/pdf2/69/78/697874/mt29f4g08abadawpd.pdf Micron NAND Flash devices include an asynchronous data interface for high-performance I/O operations. These devices use a highly multiplexed 8-bit bus (I/Ox) to transfer commands, address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#.
  • Page 50 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) Auto-negotiation to automatically select the highest link-up speed (10/100Mbps) and duplex (half/full). Loopback modes for diagnostics. Single 3.3V power supply with VDD I/O options for 1.8V, 2.5V or 3.3V. Built-on 1.2V regulator for core.
  • Page 51 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) Best-in-class real-world reception. Exceeds discrete MOPLL-based tuners. Industry-leading phase noise performance. High immunity to Wi-Fi and LTE interference. Low power consumption. 3.3 V and 1.8 V power supplies. Single-supply option for 3.3 V-only operations.
  • Page 52 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) Suitable for low power design: 140 mW (typical, 36 MHz IF sampling mode). Dual 12-bit ADCs: accept 1st IF, low IF, or zero-IF inputs. DVB-T channel bandwidth: 5, 6, 7, 8 MHz.
  • Page 53 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) The Si2167-B20 programmable Transport Stream interface provides a flexible range of output modes and is fully compatible with all MPEG decoders or conditional access modules to support any customer application.
  • Page 54 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) The Si2168 integrates DVB-T2, DVB-T, and DVB-C digital demodulators into a single advanced CMOS technology mixed- signal die for next generation terrestrial and legacy cable TV standards. Leveraging Silicon Labs' proven digital demodulation architecture, the Si2168 achieves excellent reception performance while significantly minimizing front-end design complexity, cost, and power dissipation.
  • Page 55 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) IC1301: LNBs supply and Control IC Part number: LNBH23QTR (ST MICRO) Sharp code: RH-IXD310WJZZY http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/CD00154977.pdf Intended for analog and digital satellite receivers/sat-TV, sat-PC cards, the LNBH23 is a monolithic voltage regulator and interface IC, assembled in PowerSSO-24 ePAD and QFN32 (5 x 5 mm.) ePAD, specifically designed to provide the 13/18 V...
  • Page 56 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) DUNTKG221WE01 (Touch & Led Unit) IC5100: 8-Bit Flash Microcontroller Part number: PIC16LF1503T-I /SL Sharp code: RH-IXD572WJZZY http://ww1.microchip.com/downloads/en/DeviceDoc/41607A.pdf High-Performance RISC CPU: 20 nA @ 1.8V, typical. C Compiler Optimized Architecture Watchdog Timer Current: Only 49 Instructions 300 nA @ 1.8V, typical...
  • Page 57 LC-60LE651 MK2 LC-60LE652 MK2 MAJOR ICs INFORMATION ( continued ) Software control Fixed Duty Cycle (FDC). combinational/sequential Pulse Frequency Mode (PFM). logic/state/clock functions. Complementary Waveform Generator AND/OR/XOR/D Flop/D Latch/SR/JK. (CWG): External or internal inputs/outputs. 8 selectable signal sources. Operation while in Sleep.
  • Page 58 LC-60LE651 MK2 LC-60LE652 MK2 NOTES:...
  • Page 59: Block Diagrams

    LC-60LE651 MK2 LC-60LE652 MK2 60” POWER UNIT BLOCK DIAGRAM (RUNTKB074WJQZ) D203 FSP Technology Inc. FSP GROUP FSP202-4FS01 TILE: P/N: size: A3 rev: 0 APPROVED: CHECKED: DESIGNER: Chlu Jessica Sheet Date: 2013/3/12 PCB File: BD-FSP202-4FS01-BLOCK File: \\rdfile\rdd3\protel\LAYOUT\ \SCH\BD-FSP202-4FS01.SchDoc :7000P-0106...
  • Page 60 LC-60LE651 MK2 LC-60LE652 MK2 60” MAIN UNIT BLOCK DIAGRAM (LE651/652 Series) MAIN UNIT BLOCK DIAGRAM LC60LE751E LC60LE752E P2705 SC4401 SPEAKERS MA386WJ CONNECTOR PCMCIA CARD SLOT SOUND 2.0 21.03.13 J9501 ETHERNET (10/100) CA1 OEN CA1 VAL IC8401 CA1 IORDN MT29F2G08A IC3502...
  • Page 61: Schematic Diagrams

    LC-60LE651 MK2 LC-60LE652 MK2 SCHEMATIC DIAGRAMS Description: VOLTAGE MEASUREMENT CONDITION: 1. The voltages at test points are measured on the stable supply voltage of AC 230V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/V tester.
  • Page 62 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 1/15 (SoC) (LE651 Series) C3333 0.022u DUNTKG135WE12 TO LVDS (011) IC3302 S80927NM TO DDRIII (003,004) D+3.3V TL3318 TO COMMON INTERFACE (014) R3328 D+3.3V C3332 0.01u C3338 R3330 0.1u TO HDMI (007) C3325 0.1u...
  • Page 63 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 2/15 (System Power) (LE651 Series) DUNTKG135WE12 TO SoC 001 TL9611 *R9608 3.3V STBY *C9654 *FB9607 4700P A529WJ DIMMING DIMMING P9601 NB224WJ Dimming TL9601 BKL_PWM2 BU3.3V TL9602 FB9603 TL9626 A529WJ OFL1 BKL_PWM1 BU5V...
  • Page 64 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 3/15 (DDR3 BLOCK I) (LE651 Series) DUNTKG135WE12 VCC1_5 VCC1_5 DQ15-B DQ12-B DQ13-B S0_UDQSN-B DQ14-B DQ9-B S0_UDQS-B DQ10-B DQ11-B S0_UDM-B DQ8-B DQ0-B S0_LDM-B S0_LDQS-B DQ1-B DQ3-B DQ2-B S0_LDQSN-B DQ6-B DQ4-B DQ7-B DQ5-B VREF0 C3504 0.1u...
  • Page 65 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 4/15 (DDR3 BLOCK II) (LE651 Series) DUNTKG135WE12 VCC1_5 VCC1_5 VCC1_5 VCC1_5 DQ15 DQ12 DQ31 DQ28 DQ13 DQ29 S0_UDQSN S1_UDQSN DQ14 DQ30 S0_UDQS DQ25 S1_UDQS DQ11 DQ10 DQ27 DQ26 S0_UDM S1_UDM DQ24 S0_LDM...
  • Page 66 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 5/15 (SCART) (LE651 Series) DUNTKG135WE12 SCART D+3.3V IC552 FB612 BH76206HFV A529WJ *SC552 TO SoC (001) *R597 STBY *SG564 ZA161WJ VXA187WJQZ TV_IN TV_IN C616 C615 VSAG 0.1u *C598 *SG556 0.1u R613 VOUT *C596...
  • Page 67 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 6/15 (PC INPUT) (LE651 Series) DUNTKG135WE12 *D529 D+5V DAN202K *SC501 TO HDMI (007) NA816WJ HDMI TO SoC (001) *R519 *C512 0.1u VGA_R VGA_R AL12 A529WJ *R516 *IC503 *FB501 *FB506 *C513 A529WJ 0.1u...
  • Page 68 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 7/15 (HDMI) (LE651 Series) DUNTKG135WE12 D+5V IC1506 R1502 CH2_HDMI_5V TC7SH08U Q1501 D+3.3V R1547 CH2_DDC_SCL 2SC3928AR R1517 C1502 0.1u R1554 CH2_DDC_SDA R1513 R1575 R1548 C1521 HDMI_HPD 0.1u C1505 D1502 R1515 EXA741WJQZ CH2_DDC_SDA R1555 R1507 4.7K...
  • Page 69 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 8/15 (LAN I) (LE651 Series) DUNTKG135WE12 V3.3_LAN TO LANII (009) CLOSE TO BGA *R9501 TO SOC (001) ET_MDIO-E MII_MDIO ET_MDC-E MII_MDC *R9506 ET_RXD1-E R_MII_RXD1 *R9519 *R9505 ET_RXD0-E R_MII_RXD0 6.49K *R9529 T9501 *FB9504...
  • Page 70 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 9/15 (STANDBY STM8S) (LE651 Series) DUNTKG135WE12 BU3.3V BU3.3V R3800 1.2K TO SoC (001) ST8_RSTN AG10 ST8_RSTN ST8_SWIN AH10 ST8_SWIN R3803 BU3.3V BU3.3V TL3816 TL3817 R3817 R3830 PD0/CH2 C3815 TO HDMI (007) 0.1u...
  • Page 71 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 10/15 (PANEL INTERFACE) (LE651 Series) LC60LE751K DUNTKG135WE12 *SC2603 WB128WJ VCC12V PANEL_VCC FB2603 A528WJ C2608 Q2604 *R2625 TXA064WJ AO3415S PANEL_VCCIN R2649 C2609 C2605 0.1u C2610 0.1u R2626 C2606 C2607 470K 0.1u 4700P Q2602...
  • Page 72 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 11/15 (COFDM) (LE651 Series) IMPEDANCE REQUIREMENTS VCC12V VCC12V DUNTKG135WE12 C1144 C1145 D+3.3V 1000P 1000P Q1101 L1107 1V2_MVDD_1 3V3_DVDD_1 10uH X1101 MMBT2907A SCA228WJ 3V3_RVDD_1 C1117 C1111 2.2u TO SoC FPII (001) 220u 3V3P1-T2...
  • Page 73 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 12/15 (USB) (LE651 Series) DUNTKG135WE12 +5V_USB1 C9554 IMPEDANCE REQUIREMENTS VA9551 0.1u VXA074WJ VA9552 VXA074WJ D+3.3V D+3.3V C9576 C9580 C9579 1000P 1000P L9551 J9551 USB3_DN ZA276WJQZ USB3_DP +5V_USB1 C9564 C9565 0.1u TO SoC FPII (001)
  • Page 74 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 13/15 (PCMCIA) (LE651 Series) DUNTKG135WE12 CA1_VCC SC4401 +3V3_CA MA386WJSA +3V3_CA C4401 0.1u R4426 CA1_CD1N CD1# IOSC16# 4.7K CA1_D2 MOD3 CA1OUT_D4 CA1_D1 MOD4 CA1_D0 MOD5 EMIBE1N MOD6 EMIA1 MOD7 R4419 4.7K EMIA2 CE2#...
  • Page 75 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 14/15 (NAND FLASH) (LE651 Series) DUNTKG135WE12 *IC8401 D+3.3V D+3.3V RH-IXD551WJQZQ MT29F2G08ABAEAWP:E C8403 TO SoC FPII (001) EMID0 EMID0 EMID1 EMID1 EMID7 EMID2 EMID2 R8401 EMID6 EMID3 EMID3 R8404 EMI_NAND_RBN EMID5 EMID4 EMID4...
  • Page 76 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 15/15 (AUDIO AMP. INTERFACE) (LE651 Series) LC60LE751K AUDIO AMP. INTERFACE N2 (28-06-2013) DUNTKG135WE12 *L2701 10uH PB014WJQZ *C2740 0.22u *R2746 *C2744 IC2701 0.22u D+3.3V 3.3V_AUDIO *R2737 C2746 STA333BW 1000P L2705 3.3V_AUDIO 47uH *C2752...
  • Page 77 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 1/15 (SoC) (LE652 Series) N2 (10 05 2013) C3333 0.022u DUNTKG135WE11 TO LVDS (011) IC3302 S80927NM TO DDRIII (003,004) D+3.3V TL3318 TO COMMON INTERFACE (014) R3328 D+3.3V C3332 C3338 R3330 0.01u 0.1u...
  • Page 78 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 2/15 (System Power) (LE652 Series) DUNTKG135WE11 TO SoC 001 TL9611 *R9608 3.3V STBY *C9654 *FB9607 4700P A529WJ DIMMING DIMMING P9601 NB224WJ Dimming TL9601 BKL_PWM2 BU3.3V TL9602 FB9603 TL9626 A529WJ OFL1 BU5V BKL_PWM1...
  • Page 79 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 3/15 (DDR3 BLOCK I) (LE652 Series) C60/ 0 DUNTKG135WE12 VCC1_5 VCC1_5 DQ15-B DQ12-B DQ13-B S0_UDQSN-B DQ14-B DQ9-B S0_UDQS-B DQ10-B DQ11-B S0_UDM-B DQ8-B DQ0-B S0_LDM-B S0_LDQS-B DQ1-B DQ2-B DQ3-B S0_LDQSN-B DQ6-B DQ4-B DQ7-B...
  • Page 80 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 4/15 (DDR3 BLOCK II) (LE652 Series) C 0/60 DUNTKG135WE12 VCC1_5 VCC1_5 VCC1_5 VCC1_5 DQ15 DQ12 DQ31 DQ28 DQ13 DQ29 S0_UDQSN S1_UDQSN DQ14 DQ30 S0_UDQS DQ25 S1_UDQS DQ11 DQ10 DQ27 DQ26 S0_UDM S1_UDM...
  • Page 81 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 5/15 (SCART) (LE652 Series) DUNTKG135WE11 SCART D+3.3V IC552 FB612 BH76206HFV A529WJ *SC552 TO SoC (001) STBY *R597 *SG564 ZA161WJ VXA187WJQZ TV_IN TV_IN C616 C615 VSAG 0.1u *C598 *SG556 0.1u R613 VOUT *C596...
  • Page 82 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 6/15 (PC INPUT) (LE652 Series) DUNTKG135WE11 *D529 D+5V DAN202K *SC501 TO HDMI (007) NA816WJ HDMI TO SoC (001) *R519 *C512 0.1u VGA_R VGA_R AL12 A529WJ *R516 *IC503 *FB501 *FB506 *C513 A529WJ *R505 0.1u...
  • Page 83 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 7/15 (HDMI) (LE652 Series) DUNTKG135WE11 D+5V IC1506 R1502 CH2_HDMI_5V TC7SH08U Q1501 D+3.3V R1547 CH2_DDC_SCL C1502 2SC3928AR R1517 0.1u R1554 CH2_DDC_SDA R1513 R1575 R1548 C1521 HDMI_HPD C1505 0.1u D1502 R1515 CH2_DDC_SDA EXA741WJQZ R1555...
  • Page 84 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 8/15 (LAN I) (LE652 Series) DUNTKG135WE12 V3.3_LAN TO LANII (009) CLOSE TO BGA *R9501 TO SOC (001) ET_MDIO-E MII_MDIO ET_MDC-E MII_MDC *R9506 ET_RXD1-E R_MII_RXD1 *R9519 *R9505 ET_RXD0-E R_MII_RXD0 6.49K *R9529 *FB9504 T9501...
  • Page 85 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 9/15 (STANDBY STM8S) (LE652 Series) DUNTKG135WE11 BU3.3V BU3.3V R3800 1.2K TO SoC (001) ST8_RSTN AG10 ST8_RSTN ST8_SWIN AH10 ST8_SWIN R3803 BU3.3V BU3.3V TL3816 TL3817 R3817 R3830 PD0/CH2 C3815 TO HDMI (007) 0.1u...
  • Page 86 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 10/15 (PANEL INTERFACE) (LE652 Series) DUNTKG135WE11 *SC2603 WB128WJ VCC12V PANEL_VCC FB2603 A528WJ C2608 Q2604 *R2625 TXA064WJ AO3415S PANEL_VCCIN R2649 C2609 C2605 0.1u C2610 0.1u R2626 C2606 C2607 470K 0.1u 4700P Q2602 2SC3928AR...
  • Page 87 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 11/15 (COFDM) (LE652 Series) IMPEDANCE REQUIREMENTS VCC12V VCC12V DUNTKG135WE11 C1144 C1145 D+3.3V 1000P 1000P L1107 Q1101 *R1113 1V2_MVDD_1 3V3_DVDD_1 10uH X1101 4.7K MMBT2907A SCA228WJ 3V3_RVDD_1 C1117 C1111 *C1123 2.2u TO SoC FPII (001)
  • Page 88 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 12/15 (USB) (LE652 Series) DUNTKG135WE11 +5V_USB1 C9554 IMPEDANCE REQUIREMENTS VA9551 0.1u VXA074WJ VA9552 VXA074WJ D+3.3V D+3.3V C9576 C9580 C9579 1000P 1000P L9551 J9551 USB3_DN ZA276WJQZ USB3_DP +5V_USB1 C9564 C9565 0.1u TO SoC FPII (001)
  • Page 89 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 13/15 (PCMCIA) (LE652 Series) DUNTKG135WE11 CA1_VCC SC4401 +3V3_CA MA386WJSA +3V3_CA C4401 0.1u R4426 CA1_CD1N CD1# IOSC16# 4.7K CA1_D2 MOD3 CA1OUT_D4 CA1_D1 MOD4 CA1_D0 MOD5 EMIBE1N MOD6 EMIA1 MOD7 R4419 4.7K EMIA2 CE2#...
  • Page 90 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 14/15 (NAND FLASH) (LE652 Series) DUNTKG135WE11 *IC8401 D+3.3V RH-IXD551WJQZQ D+3.3V MT29F2G08ABAEAWP:E C8403 TO SoC FPII (001) EMID0 EMID0 EMID1 EMID1 EMID7 EMID2 R8401 EMID2 EMID6 EMID3 EMID3 R8404 EMI_NAND_RBN EMID5 EMID4 EMID4...
  • Page 91 LC-60LE651 MK2 LC-60LE652 MK2 60” Main Unit Diagram 15/15 (AUDIO AMP. INTERFACE) (LE652 Series) DUNTKG135WE11 *L2701 10uH PB014WJQZ *C2740 0.22u *R2746 *C2744 0.22u IC2701 D+3.3V 3.3V_AUDIO C2746 *R2737 STA333BW 1000P L2705 3.3V_AUDIO 47uH *C2752 OUT4B OUT3A FB2708 *R2738 A529WJ C2747...
  • Page 92 LC-60LE651 MK2 LC-60LE652 MK2 60” Power Supply Diagram 1/2 (RUNTKB074WJQZ) HOT CHASSIS COLD CHASSIS SF46G SCK15046 47uF,200V 47uF,200V 70V/1.8A D901 8LM0265901 8LM0289201 8LM0289201 MUR460 BEAD 8TI0120601GP FB101 T101:12 C901 C902 SC101 TH101 F101 LF101:2 L603:1 D601 FB601 LF103:1 L601:1 JUMP...
  • Page 93 LC-60LE651 MK2 LC-60LE652 MK2 60” Power Supply Diagram 2/2 (RUNTKB074WJQZ) 1N4007 D904A BEAD HER303 HER303 BEAD L901A FB901A D901A FB902A D902A L902A V-LED LED4+ V-LED LED3+ C921A C923A R923A R925A R969A R924A C922A N.C. R926A C924A N.C. R972A R973A R968A...
  • Page 94 LC-60LE651 MK2 LC-60LE652 MK2 60” Key Unit Diagram (DUNTKG221WE01) DUNTKG221WE01 BU+3.3V FB5100 A529WJ C5101 C5103 0.1u 6.3V POWERON R5108 BU+3.3V C5104 MENU INPUT D5102 R5107 0.1u R5109 EXA741WJQZ P5101 MCLR NA345WJ TL5120 +12V C5100 D5100 2.2u EXA741WJQZ TL5112 12VD C5102...
  • Page 95 LC-60LE651 MK2 LC-60LE652 MK2 60” Control Unit Diagram 1/6 (CONTROL) 6& :%:- 72 32:(5  )% 73 $:-4= 9 9&& & & 73 & & X X 9 X X 73 &<% &<% $$$8 $$$8 9 73 9 73 9&$$$8'-0< 9 73 9&&B9B$...
  • Page 96 LC-60LE651 MK2 LC-60LE652 MK2 60” Control Unit Diagram 2/6 (CLOVER) 72 32:(5  9&&B9 7&1B9'' 9&&B9B$ )% $:- & 5 )% .=$:-3= 72 PLQL/9'6&21  $:- 7/ )% 73 $:- 7&1B9'' 7&1B/2$'B0$6. 7/ 73 & & 7&1B9''4 7/ 73 72 /('B&3/'  ,& /&'&217 81,7 ...
  • Page 97 LC-60LE651 MK2 LC-60LE652 MK2 60” Control Unit Diagram 3/6 (LED_CPLD) /&'&217 81,7  4.,73):-7; 43:%;):-== '817.)[[[[ & & X X 73 73 73 73 73 73 72 /9'6B&RQQ  73 73 73 73 73 73 6&/B), 6'$B), 35' 35' 73 2B706 35&...
  • Page 98 LC-60LE651 MK2 LC-60LE652 MK2 60” Control Unit Diagram 4/6 (POWER) /&'&217 81,7  4.,73 :-7; 43:%; :-== '817. [[[[ 5 5 5 . 1&< &< 1&< 9/6B9 72 &6  9+ ' & (;$:- & & & & X X X X &<% .=$:-4= &<%...
  • Page 99 LC-60LE651 MK2 LC-60LE652 MK2 60” Control Unit Diagram 5/6 (CS) /&'&217 81,7  4.,73 :-7; 43:%; :-== '817. [[[[ &< 5 ,B9&6 & X &=% &< 5 ,B9&6 & X &=% & & & & & & & & .=$:-3= .=$:- .=$:- .=$:- .=$:-3=...
  • Page 100 LC-60LE651 MK2 LC-60LE652 MK2 60” Control Unit Diagram 6/6 (miniLVDS Connector) /&'&217 81,7  4.,73 :-7; 43:%; :-== '817. [[[[ /()7 FRQ 9*/B9 8B9*+B9 6& 5,*+7 FRQ 73 :$:- 5 &< 73 6& 73 :$:- 9*/B9 5 &< 73 8B9*+B9 73 73 /B*63...
  • Page 101: Printed Wiring Boards

    LC-60LE651 MK2 LC-60LE652 MK2 PRINTED WIRING BOARD Main Unit PWB 1/4 (QPWBXG135WJN1) Side A UART SC2603 IC9601 P3302 CN9401 FB9609 C3550 L9601 CN9402 IC3502 Q9403 IC3501 S3301 C9608 C9517 J9501 R2663 R2655 C3333 C3547 C3305 IC3302 P3301 T9501 X9400 IC3503...
  • Page 102 LC-60LE651 MK2 LC-60LE652 MK2 Main Unit PWB 2/4 (QPWBXG135WJN1) Side A Chip Parts C9614 P3302 SC2603 IC9601 C3550 R3319 R3318 C9408 R9609 R9606 FB9402 L9601 R9602 C9616 R9613 Q9404 Q9403 CN9402 R9473 R9472 S3301 T9401 IC3502 IC3501 C9517 P3301 C3305...
  • Page 103 LC-60LE651 MK2 LC-60LE652 MK2 Main Unit PWB 3/4 (QPWBXG135WJN1) Side B P3302 LUG104 C3373 C9612 R9402 R3309 R9401 C3325 LUG103 R3312 C9407 R2650 R2614 R2628 C9401 C9404 C3501 R3321 R9438 C3512 FB9403 C3517 R2625 C3505 C9503 R2624 FB4400 C3507 C3518...
  • Page 104 LC-60LE651 MK2 LC-60LE652 MK2 Main Unit PWB 4/4 (QPWBXG135WJN1) Side B Chip Parts R9622 C3373 R3313 R9404 R3312 C9407 R9516 C3530 C3521 C9512 R9517 C3325 C3528 C3523 C3540 R3305 R3327 C3503 D3301 R3328 C3526 C3544 R3310 R3322 C3538 C3533 C3525...
  • Page 105 LC-60LE651 MK2 LC-60LE652 MK2 60” Power Unit PWB 1/2 ( RUNTKB074WJQZ) Side A...
  • Page 106 LC-60LE651 MK2 LC-60LE652 MK2 60” Power Unit PWB 2/2 (RUNTKB074WJQZ) Side B...
  • Page 107 LC-60LE651 MK2 LC-60LE652 MK2 60” Control Unit PWB (1/2) (QKITPG222WJTX) Side A A B C D E F G H C4829 P4804 KG222 QPWBXG222WJZZ Q6211 XG222WJZZ QKITPG222WJTX IC6208 C4832 CN4801 C6257 IC6201 C6260 D6206 C5802 IC6801 IC5103 D6211 Q6206 IC6207...
  • Page 108 LC-60LE651 MK2 LC-60LE652 MK2 60” Control Unit PWB (2/2) (QKITPG222WJTX) Side B Q6203 Q6208 Q6209 Q6204 CN5801 IC5102 IC4801 D6801 SIDE_B CN5301 CN5101 Q6307 Q6203 R6307 C6295 R6297 IC6209 R6298 C6285 C6284 R6306 R6245 R6292 C6249 R6267 R6266 R6263 R6219...
  • Page 109 LC-60LE651 MK2 LC-60LE652 MK2 Key Unit PWB ( QPWBNG221WJN1) Side A C5110 DUNTKG221WJ IC5100 Q5102 QPWBNG221WJN1 P5101 Q5101 Q5100 Q5103 R5128 R5124 R5126 D5104 Q5102 Q5103 R5127 R5123 R5115 R5112 D5102 C5105 D5106 IC5100 C5110 C5100 C5106 R5125 R5122 C5108...
  • Page 110 LC-60LE651 MK2 LC-60LE652 MK2 NOTES:...
  • Page 111: Replacement Parts List

    LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION Price code LC-60LE651/652 MK2 IC 9551 RH-IXD187WJZZY CI AAT4614IGU-2-T1 ANALOGIC TECH IC 9552 VHI2514BAEZ-1Q IC USB2514B-AEZG PARTS LISTING IC 9553 VHIS170B50U-1Y IC S-1170B50UC-0UJTFG IC 9601 VHIBD9328EF-1Y IC BD9328EFJ 2A DCDC ROHM REPLACEMENT PARTS Replacement parts which have special safety characteristics are identifi...
  • Page 112 LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION REF No. PARTS DESCRIPTION Price code Price code VA 1507 RH-VXA074WJZZY VARISTOR AVRL101A1R1NTB FB 9614 RBLN-A529WJZZY FERRITE MI0603M121R-10 VA 1508 RH-VXA074WJZZY VARISTOR AVRL101A1R1NTB FB 9617 RBLN-A529WJZZY FERRITE MI0603M121R-10 VA 9551 RH-VXA074WJZZY VARISTOR AVRL101A1R1NTB...
  • Page 113 LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION Price code REF No. PARTS DESCRIPTION Price code C 0560 VCCCCZ1HH470JY C CERAM 0402 47PF 50V 5% C 1132 VCKYCZ1EF104ZY CERAM C 0402 100NF 25V 20% C 0569 VCKYCZ1EF104ZY CERAM C 0402 100NF 25V 20%...
  • Page 114 LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION Price code REF No. PARTS DESCRIPTION Price code C 2724 VCEASX1CN476MY ELEC C 47UF 16V MVL16VC47MF60E1 C 3331 RC-KZA146WJZZY C CERAM 0402 1uF 6,3V 10% B-Grade C 2725 RC-EZ1339CEZZY ELEC C 220UF 16V...
  • Page 115 LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION Price code REF No. PARTS DESCRIPTION Price code C 3517 VCKYCZ1EF104ZY CERAM C 0402 100NF 25V 20% C 9521 VCCCCZ1HH120JY CERAM C 0402 12PF 50V 5% C 3518 VCKYCZ1EF104ZY CERAM C 0402 100NF 25V 20%...
  • Page 116 LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION Price code REF No. PARTS DESCRIPTION Price code C 9707 VCKYCZ1HB332KY CERAM C 0402 3,3NF 50V 10% R 0614 VRS-CZ1JF471JY RES 0402 470 OHM 5% 1/16W SMD C 9708 VCKYCZ1EF104ZY CERAM C 0402 100NF 25V 20%...
  • Page 117 LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION Price code REF No. PARTS DESCRIPTION Price code R 1570 VRS-CZ1JF101JY RES 0402 100 OHM 5% 1/16W SMD R 3320 VRS-CZ1JF103JY RES 0402 10KOHM 5% 1/16W SMD R 1571 VRS-CZ1JF101JY RES 0402 100 OHM 5% 1/16W SMD...
  • Page 118 LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION Price code REF No. PARTS DESCRIPTION Price code R 3803 VRS-CZ1JF103JY RES 0402 10KOHM 5% 1/16W SMD R 8412 VRS-CZ1JF330JY RES 0402 33 OHM 5% 1/16W SMD R 3807 VRS-CZ1JF472JY RES 0402 4,7KOHM 5% 1/16W SMD...
  • Page 119 VS2SD2657++-1Y TRANSISTOR NPN 2SD2657TL (ROHM) TUNER Q 5103 VS2SD2657++-1Y TRANSISTOR NPN 2SD2657TL (ROHM) LE652 series RTUDSA034WJZZ DIGITAL DBS TUNER BS2S7HZ6B01 (SHARP) TU1102 DIODES MISCELLANEOUS PARTS D 5100 RH-EXA741WJQZY ZENER DIODE 5.6V DZ2J056MOL(PANASONIC) H EX ENE D DE . V D J...
  • Page 120 LC-60LE651 MK2 LC-60LE652 MK2 REF No. PARTS DESCRIPTION Price code ACCESSORIES PARTS LISTING R 5123 VRS-CZ1JF102JY RES 0402 1KOHM 5% 1/16W SMD REF No. PARTS DESCRIPTION Price code CSAKAA186WJ01 SCREW STAND BAG ASSEMBLY R 5124 VRS-TQ2BD000JY OX RES 0 OHM 5% 1/8W SMD...
  • Page 121: Cabinet And Mechanical Parts 60

    LC-60LE651 MK2 LC-60LE652 MK2 CABINET AND MECHANICAL PARTS 60” unit control button HOLDER piramid lighting DIFFUSER MAIN unit A” POWER A” unit CONTROL unit...
  • Page 122 FRONT CABINET DUNTKG135FM12 ADJUST MAIN UNIT (60LE651) DUNTKG135FM11 ADJUST MAIN UNIT (60LE652) RUNTKB074WJQZ POWER UNIT WITH LED DRIVER 60” SHARP CDAI-A863WJ02 KS-STAND LC60LE65*E MK2 HDECQB797WJ1A PIRAMID LIGHTING DIFFUSER (CHLDFA077WE02 ctrl button set) DUNTKG221WE02 KEY UNIT 60” LE65x (CHLDFA077WE02 ctrl button set)
  • Page 123: Packing Of The Set 60

    LC-60LE651 MK2 LC-60LE652 MK2 PACKING OF THE SET 60” Stand Kit Rear side (60LE651 MK2)* (60LE652 MK2)** TINS-G294WJZZ * TINS-G295WJZZ * TINS-G296WJZZ * Front side TINS-G294WJZZ ** TINS-G296WJZZ ** < E2 > TINS-G294WJZZ * < K2 > ( TGAN-A801WJN1 * )
  • Page 124 LC-60LE651 MK2 LC-60LE652 MK2 COPYRIGHT © 2014 BY SHARP CORPORATION ALL RIGHTS RESERVED No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

Table of Contents