Table Of Contents - Toro Flex-Force Power System 51870 Operator's Manual

Important:
With your mobile device, you can
scan the QR code (if equipped) on the serial
number plate to access warranty, parts, and other
product information.
1. Model and serial number location.
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety-alert symbol
(Figure 2), which signals a hazard that may cause
serious injury or death if you do not follow the
recommended precautions.
Safety-alert symbol
This manual uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Figure 1
Figure 2
Contents
Safety ....................................................................... 4
Safety and Instructional Decals .......................... 7
Setup ........................................................................ 9
Installing the Bar and Chain ................................ 9
Assembling the Pole Saw ................................. 10
Adding Bar and Chain Oil to the Pole
Saw................................................................11
Product Overview ................................................... 12
Specifications .................................................. 12
Operation ................................................................ 13
Before Using the Pole Saw ............................... 13
Starting the Pole Saw ....................................... 13
Shutting Off the Pole Saw ................................. 13
Cutting with the Pole Saw ................................. 14
Pruning a Tree .................................................. 15
Removing the Battery Pack .............................. 15
Charging the Battery Pack ................................ 16
g334439
Maintenance ........................................................... 17
Recommended Maintenance Schedule(s) ........... 17
Checking the Oil Level and Adding Bar and
Chain Oil ....................................................... 17
Checking the Flow of Bar and Chain
Oil ................................................................. 17
Adjusting the Chain Tension ............................. 18
Servicing the Guide Bar, Chain, and Drive
Sprocket........................................................ 19
Installing the Guide Bar and Chain .................... 20
Sharpening the Chain ....................................... 21
Service ............................................................. 21
Storage ................................................................... 21
Preparing the Battery Pack for
Recycling ...................................................... 21
Troubleshooting ...................................................... 22
sa-black
3