Hints And Tips - AEG BPE742320M User Manual

Hide thumbs Also See for BPE742320M:
Table of Contents

Advertisement

20
www.aeg.com
10.5 Automatic Switch-off
For safety reasons the oven turns off
automatically after some time, if a
heating function works and you do not
change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 245
250 - maximum
The Automatic Switch-off does not work
with the functions: Light, Food Sensor,
Duration, End Time.
10.6 Brightness of the display
There are two modes of display
brightness:

11. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
The temperature and baking
times in the tables are
guidelines only. They
depend on the recipes and
the quality and quantity of
the ingredients used.
11.1 Cooking
recommendations
Your oven may bake or roast differently
to the oven you had before. The below
tables provide you with the standard
settings for temperature, cooking time
and shelf position.
If you cannot find the settings for a
special recipe, look for the similar one.
11.2 Inner side of the door
On the inner side of the door you can
find:
• the numbers of the shelf positions.
Switch-off time (h)
12.5
8.5
5.5
1.5
• Night brightness - when the oven is
turned off, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the oven is turned on.
– if you touch a symbol during the
night brightness (apart from ON /
OFF), the display goes back to
the day brightness mode for the
next 10 seconds.
– if the oven is turned off and you
set the function: Minute Minder.
When the function ends, the
display goes back to the night
brightness.
10.7 Cooling fan
When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
the oven, the cooling fan can continue to
operate until the oven cools down.
• information about the heating
functions, recommended shelf
positions and temperatures for
dishes.
11.3 Advice for special heating
functions of the oven
Keep Warm
The function allows you to keep food
warm. The temperature is set
automatically to 80 °C.
Plate Warming
The function allows you to warm plates
and dishes before serving. The
temperature is set automatically to 70 °C.
Place plates and dishes in stacks evenly
on the wire shelf. Use the first shelf
position. After half of the warming time
switch their places.
Dough Proving

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bpk742320bBpk742320m

Table of Contents