PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com CONTENTS Page Page 1 Safety Precautions 6.16. Replacement of Incidence Polarizer 1.1. General Guidelines 6.17. Replacement of PBS Array (Analysis Block) 1.2. Leakage Current Check 6.18. Removal of Iris Unit 1.3.
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 1 Safety Precautions 1.1. General Guidelines · For continued safety, no modification of any circuit must be attempted. · Unplug the power cord from the power outlet before disassembling this projector.
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 2 Ext Option This projector has EXT OPTION in addition to standard on-screen menus. · There are SELF CHECK and FLICKER ADJUST for service, etc. 2.1. Procedure to enter EXT OPTION 1.
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 3 Self-Check Mode This mode is used to narrow down the location of the failure. 3.1. Procedure to enter the self-check mode Select "SELF CHECK" on "EXT OPTION" menu and press "ENTER" button on the main unit or remote control unit.
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 3.3. Canceling the self-check mode Press "MENU" button on the main unit or remote control unit. 4 Flicker Adjustment Mode If replacing the optical parts (LCD Panel / LCD block) or A-P.C.Board of this projector, enter the flicker adjustment mode and minimize the flicker.
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 5 Using the SERIAL Connector The serial connector which is on the back connector panel of the projector conforms to RS-232C standard. This projector can be controlled by a PC which is connected as shown in "5.1. Connection".
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 5.4. Basic Format The data sent from the PC to the projector is transmitted in the format shown below. Notes: · If sending multiple commands, check that a call back has been received from the projector for 1 command before sending the next command.
Page 12
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com Query Commands Parameters [Example] When controls the audio volume to +30 by a PC (Sends commands as the following:) · When a command which does not require parameters is sent, the colon (:) is not required.
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 5.6. Communication Cable Specifications 5.7. Signal Selector Connecting Cable Specifications When connecting to a signal selector (ex. TW-SWS62J), use a cable with specifications below. Connecting method: Connects a video signal cable from the signal selector to "VIDEO IN", and an RGB signal cable to "PC IN".
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 6 Disassembly Instructions Warning: · Be sure to unplug the power cord from the power outlet before disassembling this projector. Caution: · While turning over a printed circuit board, be sure to put a insulating material under it to prevent a short circuit.
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 6.2. Removal of Upper Case 1. Turn counterclockwise the shift lever by about one and a half rotations (540 ° ) from the position in which it is locked, and pull it forward to remove.
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 3. Unscrew the 2 screws and remove the K-P.C.Board block. 7. While pressing to shut each hook of the 2 resinous stands, remove the B/Q-Module. 6.6. Removal of B/Q-Module 1. Remove the upper case according to the section 6.2.
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E through 4 in the section 6.3. "Removal of A-P.C.Board". 3. Unscrew the 1 screw and remove the thermofuse attachment. 4. Unscrew the 2 screws and remove the lamp unit terminal.
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 2. Unscrew the 2 screws and remove the LCD block. Note: · Be careful not to touch the surface of prism and LCD panel. 3. Cut the 4 LCD panel installation spindles at the position A and remove the LCD panel (B).
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E seal. · Finally, identify the panel color by the part number printed on the FPC. 6.14. LCD Panel Combination · Part number is printed on the FPC of LCD Panel.
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 6.17. Replacement of PBS Array (Analysis Block) 1. Remove the A-P.C.Board and lamphouse according to the steps 2 through 5 in the section 6.9. "Removal of Analysis Block ". 2. Unscrew the 2 screws and remove the LCD block.
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 4. Remove the PBS array (with PBS mask). 5. Remove the PBS mask from the PBS array. 6. Install the PBS mask onto a new PBS array. 7. Install the new PBS array (with PBS mask) in the analysis case (lower).
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 7 Measurement and Adjustments 7.1. Adjustment Procedure Flowchart 7.2. Cautions for Adjustment · Never turn off the MAIN POWER switch until every fan completely stops. · To maintain and ensure safety, always use the designated components for replacement parts.
Page 23
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E Note: · See figures in the section 6.12. "Replacement of LCD Panel (B)" for 2 screws fixing the panel adjuster and 3 screws fixing the panel attachment. 2. Reassemble the projector in the reverse order of disassembling, but leave the upper case and the screws fixing the A- P.C.Board block as they are removed.
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com Repeat steps (1) to (3) until the green and blue crosshatch patterns merge into a cyan pattern. 8. After the adjustment, reassemble the projector according to the steps 9 through 13 in the section 6.12. "Replacement of LCD Panel (B)".
Page 25
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 3. Connect the service kit (extension cables). · Each flexible cable of LCD Panels (R/G/B) - Connectors (A1/A2/A3) on A-P.C.Board · Thermosensor (Intake air) connector - Connector (A7) on A-P.C.Board ·...
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 7.5.3.2. G Reflector Adjustment 1. Turn on the power and display 100 % white pattern on the screen. 2. Loosen the 2 screws fixing the mirror adjusting lever A just until the lever can be shifted.
Page 27
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 7.6.2. Operating Procedure 1. Run software program by the keyboard entry. Note: · Use the software program as below. Adjustment Tool [AX200] 2. The first menu is Port selection menu.
Page 28
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 7.6.4. Data Transmission/Reception Menu 7.6.4.1. Explanation of Buttons Micom Data Transmission: Reads the microcomputer data from the file and transmits it to the projector. Micom Data Reception: Receives the microcomputer data from the projector and writes it in the file.
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com the 8 or 2 key, its color returns to black. Stop: Discontinues the communication. (This button is usually set for its inactive mode.) Undo: Returns the setting value to its original state and transmits its data. The color of the text "OK" returns to black.
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 9.2. Interconnection Block Diagram (2/2) Interconnection Block Diagram (2/2) A-P.C.Board...
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 10 Block Diagram 10.1. Power Supply Power Supply SWITCHING STB 3.3 V TRANSFORMER PHOTOISOLATOR DETECTOR COLD VOLT_DET SWITCHING +17 V REGULATOR K-P.C.Board MAIN POWER F9101 RELAY POWER A 6 V...
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 10.2. Signal Processing (1/2) Signal Processing (1/2) HDMI IN 1 HDMI IN 2 IC1001 IC1004 IC1005 IC1006 128M DDR-SDRAM RESIZE, V-KEYSTONE CORRECTION, SD/HD IP SWITCHING, BRIGHT TRANSFORMATION, VIDEO DECODER, CONTRAST...
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E 10.3. Signal Processing (2/2) Signal Processing (2/2) H-P.C.Board IC1030 Q1120, Q1121 BUFFUER IC1053 SWITCH Q1111 SAMPLING HOLD IC1054 ANGLE SENSOR LCD PANEL (B) DRIVER LEVEL SHIFT IC1115 COLOR UNEVENNESS IC1055...
Page 46
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E...
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com 15 Replacement Parts List Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description TEWA833 FILM IMPEDOR [MECHANICAL PARTS] TEWA971 SHIELD GASKET 1 TEWB132...
Page 67
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description TPCC33102 CARTON AX200U XTBT969FJK SCREW TPCC33103 CARTON AX200E XTN3+6GFJ SCREW TPDF1741 ACCESSORY CARTON XTW3+8PFJ...
Page 68
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description Q1013 B1GBCFJJ0007 TRANSISTOR D9622 B0ECHP000003 DIODE(B-PCB) Q1014 B1GBCFJJ0007 TRANSISTOR D9623 B0ECHP000003 DIODE(B-PCB) Q1015 2SD1819A0L...
Page 69
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description L1145 J0JGC0000059 FILTER R1041 ERJ3GEYJ331 M 330 OHM,J,1/16W L1145 J0JJC0000022 EMI FILTER R1042 ERJ3GEYJ103...
Page 70
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R1124 ERJ2GE0R00 M 0 OHM, 0.063W R1208 EXB28V560J RESISTOR ARRAY R1125 ERJ2GEJ562 M 5.6KOHM, 0.063W...
Page 71
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R1363 ERJ2GEJ562 M 5.6KOHM, 0.063W R1600 ERJ3GEYJ470 M 47 OHM,J,1/16W R1364 ERJ2GEJ103 M 10K OHM, 0.063W...
Page 72
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description R2010 ERJ3GEYJ470 M 47 OHM,J,1/16W C1042 F1G1C104A077 CAPACITOR R2011 ERJ3GEYJ472 M 4.7KOHM,J,1/16W C1043 F1G1C104A077...
Page 73
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description C1145 ECJ1VC1H100C C 10PF, 50V C1251 F1G1C104A077 CAPACITOR C1146 EEEHB0G101R E 100UF, 4V C1252...
Page 74
PT-AX200U / PT-AX200E All manuals and user guides at all-guides.com Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description C1465 F1G1H1020008 CAPACITOR C1637 ECJ1VF1A225Z CAPACITOR C1467 F1G1C104A077 CAPACITOR C1638 ECJ1VF1A225Z CAPACITOR C1468 F1G1C104A077...
Page 75
All manuals and user guides at all-guides.com PT-AX200U / PT-AX200E Ref. Part No. Part Name & Remarks Ref. Part No. Part Name & Remarks Description Description C9102 F1BAH1020016 CAPACITOR SW9101 K0AAKA000014 SWITCH C9103 F1BAH1020016 CAPACITOR SW9601 K0BDB0000081 SWITCH(B-PCB) C9106 ECQU2A473MLA...