Page 2
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
Page 4
Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug.
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use.
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations.
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label)
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be...
Installation Permitted water temperature: up must be min. 50 cm and max. 100 cm from to 25°C the floor. A discharge hose longer than 4 The dishwasher may not be connected to meters causes dirty washing. open warm water devices or flow-through Attach the water discharge hose to the water heaters.
Installation Aquasafe+ The voltage and allowed fuse or breaker • protection are specified in the “Technical (depends on model) specifications” section. If the current The Aquasafe+ system protects against value of the fuse or breaker in the house water leaks that may occur at the hose is less than 16 Amps, have a qualified inlet.Water contact with the valve box of electrician install a 16 Amp fuse.
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly.
Page 15
Preparation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
Preparation If the hardness level of the supply water It is recommended to use is above 90 °dF or if you are using well granule- or powder-formed water, then it is recommended to use water softening salts in the water purification devices and special filters.
Preparation Adding detergent You can put about 2 kg of softening salt into the salt Pay attention to the warnings reservoir. on the detergent packaging to get better washing and 5. Replace the lid and tighten it when the drying results. Contact the reservoir is full.
Preparation Tablet detergents In addition to the conventional tablet detergents, there are also commercially available detergent tablets that show water softening salt and/or rinse aid effect. Some types of these detergents contain special- purpose components such as glass and stainless steel protectors. These tablets show their effects up to a certain water 3.
Preparation When you switch to powder 2. Fill the reservoir until “MAX” level. detergent from tablet detergent: Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3.
Preparation Items not suitable for Place the hollowed dishes such as • bowls, glasses and pans upside down washing in the dishwasher in the dishwasher. Thus, accumulation Never wash dishes soiled by cigarette • of water in deep hollows is prevented. ash, candle remnants, polish, dyestuff, To prevent possible injuries, chemicals, etc.
Page 21
Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Dishwasher / User’s Manual 19 / 41 EN...
Preparation Cutlery basket Collapsible lower basket tines (depends on model) Cutlery basket is designed to wash your (depends on model) dishes such as knife, fork, spoon, etc. in an Foldable tines (A) located at the lower efficient manner. basket of the machine are designed for Since the cutlery basket can be moved (A, an easier placement of large pieces such B), you can create more space while placing...
Preparation Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. Therefore, it will be appropriate to bring the tines in the middle to horizontal or vertical position by holding them from their stems and pushing in the direction of arrow.
Preparation Lower basket bottle wire (depends on model) The bottle wire is designed for easier washing of long pieces with wide mouths. You may take out the bottle wire from the basket when not in use by pulling it out from both sides (H).
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B).
Preparation Collapsible upper basket Ceiling cutlery basket wires (depends on model) Ceiling cutlery basket is designed to wash (depends on model) your cutlery items such as forks, spoons You can use collapsible wires when you and etc. by placing them between the bars need a larger space for your dishes in the on the basket.
Operating the product Display 5. Function keys 2. On/Off key Tablet detergent function 3. Start/Pause/Cancel key Half Load function 4. Time Delay key Extra Drying Function Not in use 6. Programme Selection keys 7. Programme indicator 12. End of Programme indicator 8.
Operating the product Keys 3. Press Programme Selection keys until the number of the programme you On / Off key selected appears on the Programme It is used to turn on or off the machine. indicator. Use P+ to switch to the next Press On / Off Key to switch ON.
Operating the product Auxiliary functions Half Load function It is used to operate the machine without Washing programmes of your dishwasher loading it completely. are designed to obtain the best cleaning Load your dishes in the machine as you effect, considering the type of the soil, like.
Operating the product Floor illumination Programming the washing Warning to show that machine is time in washing phase Time Delay (depends on the model) If an economical electricity tariff is applied Your machine reflects a light to the floor in your region, you can use the Time during the washing process.
Page 32
Operating the product Changing the settings while Time Your machine performs water Delay function is enabled softening depending on the While the Time Delay function is activated, hardness level of the supply you cannot make changes in the washing water. Remaining time displayed programme, auxiliary functions or the towards the end in some duration of delay time.
Operating the product To activate the Child Lock: There might be residues of Pres Child (Key) Lock keys detergent or rinse aid left in the simultaneously and hold for 3 seconds. machine and / or on the pieces 2. "3", "2", "1" is displayed on Display being washed depending on the Information Line and key lock is step the programme you have...
Operating the product Leave your dishes in the Adjusting the amount of machine for about 15 minutes rinse aid to cool down after they are After turning on the machine, washed. Your dishes will dry press Time Delay and P+ keys in a shorter time if you leave simultaneously.
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters.
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose.
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller.
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •...
Page 39
Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
Page 40
Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
Page 41
Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
Page 42
Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.