Heat Pump Details; Declaration Of Conformity; Type Plate; Product Overview - Bosch Compress 7000i AW Installation Manual

3.2

Heat pump details

The Compress 7000i AW heat pumps are intended for connection to the
AWM/AWMS or AWE/AWB indoor units.
Possible combinations:
AWM / AWMS AWE / AWB
9 9
9 9
9 9
17 17
17 17
Table 3 Possible combinations
AWM and AWMS are equipped with an integrated electric booster
heater.
1)
AWMS is equipped with an integrated solar loop.
AWE is equipped with an integrated electric booster heater.
1)
AWB is intended for an auxiliary heater (electric, oil and gas heating)
with mixer.
3.3

Declaration of conformity

The design and operating characteristics of this product comply with the
European and national requirements.
The CE marking declares that the product complies with all the
applicable EU legislation, which is stipulated by attaching this
marking.
The complete text of the Declaration of Conformity is available on the
Internet: worcester-bosch.co.uk
3.4

Type plate

The data plate is located on the rear side of the heat pump. It contains
information on the output, part number and serial number and also the
date of manufacture. The product designation AirO S Hydro is also
specified on the data plate.
1) AWMS and AWB are not available in United Kingdom and Ireland.
Compress 7000i AW – 6721830633 (2021/02)
3.5
Compress 7000i AW
5 OR-S
7 OR-S
9 OR-S
13 OR-S/T
17 OR-T
Fig. 2
[1]
[2]
[3]
[4]
[5]
[6]
Description applies for all sizes.

Product overview

Product overview
Electronic expansion valve VR1
Electronic expansion valve VR0
Four-way valve
Pressure switch/pressure sensor
compressor
Inverter
Product description
1
2
3
4
5
6
5