Yamaha RemoteLive Disklavier DKC-850 Connection Manual page 2

Replacing the Existing Control Unit with DKC-850
Connect DKC-850 to your piano, replacing with the existing control unit.
5
Tighten
Conversion
cable
(supplied)
4
Tighten
Cautions
• Use the Yamaha PJP-PS02/PJP-PS04 adaptor, or an equivalent recommended by Yamaha. Use of
other AC adaptors may result in damage, overheating, or fire.
• Do not stretch the cable or bend its ends.
• Do not attempt to use the cable if it is stretched or if the ends of the cable have been bent. Attempting
to do so may cause interruptions to the power supply.
• Always turn off the main unit power before disconnecting the AC adaptor.
• When you wish to move DKC-850, unplug the AC adaptor from the AC wall outlet and disconnect if
from the DC-IN 12V connector on the rear panel of DKC-850 before proceeding.
• Unplug the AC adaptor from the AC wall outlet if you do not intend to use the instrument for an
extended period of time.
7
DKC-850
6
Connect monitor
speakers.
See page 4.
Control
cable
3
Loosen
8
AC adaptor (PJP-PS02/PJP-PS04)
(supplied)
Your piano
9
2
Power cable
(supplied)