Advertisement
Installation Steps
Step 1: Before you Begin
Step 2: Shut Off All Equipment
IMPORTANT: Shut down and unplug
each device separately (i.e., don't
simply shut off your power strip)
Step 3: Connect Equipment
IMPORTANT: Use your existing cable
between your modem and TA and the
blue cable that came in this package
between your TA and your PC
Step 4: Turn on Equipment
IMPORTANT: You must turn on your
equipment IN THE ORDER INDICATED
for your service to work correctly
Make sure you have your AT&T CallVantage Account Information
1.
Your 10 digit account provided in your order confirmation e-mail
2.
Your account password (selected when you ordered the service; if you forgot it go to www.callvantage.
att.com and click on "forgot your password?"
1.
Shut down your PC
2.
Unplug your modem
3.
Leave all equipment off for at least 10 seconds
Basic Setup Diagram without a Router (see below for alternative router setup)
CABLE / DSL JACK
MODEM
TELEPHONE
CO-AXIAL CABLE / DSL PHONE LINE (LEAVE AS-IS)
A
PLUG IN CABLE MODEM, TURN ON,
AND WAIT UNTIL ALL LIGHTS
GO STEADY
TELEPHONE ADAPTER (TA)
Line 1 Line 2
ETHERNET CABLE
(USE EXISTING CABLE)
B
PLUG IN TA AND WAIT 30 SECONDS
Line 1 Line 2
WALL
OUTLET
ETHERNET CABLE
(USE CABLE PROVIDED)
C
TURN ON PC
PERSONAL
COMPUTER
Advertisement
