Cleaning By The User (Adf); Cleaning The White Roller; Other Cleaning - Canon SmartBase 1270D Service Manual

4.2 Cleaning by the User (ADF)

4.2.1 Cleaning the White Roller

If the backs of originals tend to become soiled, clean the white roller as follows:
1) Open the ADF, and clean the bottom of the white roller with a cloth moistened with wa-
ter (and wrung well). If the dirt is excessive, use alcohol with lint-free paper. Be sure to
dry wipe it with a cloth or lint-free paper thereafter.
2) Press the Additional Functions key, and hold down the Right Arrow or Left Arrow key
until the LCD indicates '6. ADJUST/CLEAN'.
3) Press the OK key.
4) Hold down the Right Arrow key or the Left Arrow key until the LCD indicates '2.
CLEAN ADF ROLLER'.
5) Press the OK key.
6) When the LCD indicates 'START CLEAN : [SET]', press the OK key. In response, the
white roller makes a 120° turn.
7) Wipe the bottom of the white roller with a cloth moistened with water (and wrung well);
then, dry wipe it.
8) Repeat steps 6) and 7) to clean the entire surface of the white roller.
9) Press the Stop key to end.

4.2.2 Other Cleaning

If images tend to become soiled, advise the user to clean the following as needed.
No. Part
1 White plate
COPYRIGHT © 2002 CANON INC.
CHAPTER 6 MAINTENANCE AND INSPECTION
Instructions
Wipe it with a cloth moistened with water (and wrung well);
then, dry wipe it.
T06-402-01
2000 2000 2000 2000 CANON SmartBase PC1210D/1230D/1270D REV. 1 MAR. 2002
6-3