Technical Specifications - Philips AVENT SCF883 Manual

Hide thumbs Also See for AVENT SCF883:
Table of Contents

Advertisement

Problem
Possible cause
Water in the water
tank is not enough
for the selected
processing time.
There is too much
limescale buildup in
the water tank.
There are food
Small food residue
residues in the
particles get into the
inner layer at the
inner layer at the
bottom of the jar.
bottom of the jar
during cleaning.

Technical specifications

-
Voltage/wattage: See type plate on the bottom of the appliance
-
Maximum water capacity of the water tank: 250 ml
-
Maximum capacity of the jar: 1050 ml
-
Operating temperature: 10°C to 40°C
-
Protection: Temperature-controlled heating system
Solution
Turn the control knob to the off position
(OFF), and add enough water for the
selected processing time.
Descale the water tank. Refer to the
section "Descaling" in the chapter
"Cleaning and descaling".
Remove the jar from the main unit.
Remove the jar lid and blade unit from
the jar.
Flip the jar, align the small hole on the
bottom to a tap and flush water into the
small hole. Use warm water to achieve a
better cleaning result.
Hold the jar handle and shake the jar for
about 15 seconds to mix the water with
the accumulated residues.
Pour out the water from the small hole.
Repeat above steps for several times
until the residues are cleaned.
ENGLISH
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents