Safety Information - Sony Bravia FW-100BZ40J Reference Manual

CAUTION
To prevent electric shock and blade exposure, do not use
this AC plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted.
• Operate the LCD Display only on 110 V - 240 V AC (U.S.A./
Canada 120 V AC) (except models with supplied AC
adapter).
• Operate the LCD Display only on DC 19.5 V (with AC
adapter).

Safety Information

Notice for customers in the United States
of America
Supplier's Declaration of Conformity
Trade Name: SONY
Model: FW-100BZ40J / FW-75BZ30J / FW-65BZ30J /
FW-55BZ30J / FW-50BZ35J / FW-50BZ30J / FW-43BZ35J /
FW-43BZ30J / FW-32BZ30J
Responsible Party: Sony Electronics Inc.
Address: 16535 Via Esprillo, San Diego, CA 92127 U.S.A.
Telephone Number: 858-942-2230
FCC Related Information
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or LCD Display reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/LCD Display
technician for help.
Pursuant to FCC regulations, you are cautioned that any
changes or modifications not expressly approved in this
manual could void your authority to operate this
equipment.
Safety and Regulatory
5 GHz bands are restricted to indoor operations only.
Notice for customers in Canada
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada's licence-exempt RSS(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
To prevent radio interference to the licensed service, this
device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its
transmit antenna) that is installed outdoors is subject to
licensing.
High-power radars are allocated as primary users (i.e.
priority users) of the bands 5250-5350 MHz and
5650-5850 MHz and that these radars could cause
interference and/or damage to LE-LAN devices.
Notice for customers in the United States
of America and Canada
This equipment complies with FCC/IC radiation exposure
limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and
RSS-102 of the IC radio frequency (RF) Exposure rules. This
equipment should be installed and operated keeping the
radiator at least 20 cm or more away from person's body
(excluding extremities: hands, wrists, feet and ankles).
This device and its antenna(s) must not be co-located or
operating with any other antenna or transmitter except
Grant condition.
Compatible Wall-Mount Bracket
Information
Use the following Sony Wall-Mount Bracket with your LCD
Display model.
Sony LCD Display Model No.
FW-75BZ30J / 65BZ30J / 55BZ30J
Sony Wall-Mount
Bracket Model No.
Use with other Wall-Mount Brackets*
and could result in property damage or injury.
*1 Only on limited region/country/LCD Display model.
*2 For instructions on using the Wall-Mount bracket with
your LCD Display please go to https://www.sony.com/
am/support for your LCD Display model and download
"Wall-Mount Bracket".
To Customers
Sufficient expertise is required for LCD Display installations.
Be sure to subcontract the installation to a Sony dealer or
licensed contractor and pay adequate attention to safety
during the installation.
Before setting up your LCD Display
Some LCD Display models are packaged with a detached
Table-Top Stand so you can mount your LCD Display to a
wall right away. See "Installing the LCD Display to the Wall"
if you want to mount the LCD Display to a wall. If you are
not mounting the LCD Display to a wall, you will need to
attach the Table-Top Stand (refer to the Setup Guide).
Be sure to consider the following while setting up your LCD
Display:
• Disconnect all cables when carrying the LCD Display.
• Carry the LCD Display with the adequate number of
people; larger size LCD Displays require two or more
people (four or more people for FW-100BZ40J).
• Correct hand placement while carrying the LCD Display is
very important for safety and to avoid damage.
US
1
SU-WL855*
2
may cause instability
3
US