Mounting The Camera - D-Link DCS-8000LHV2 User Manual

Section 2 - Installation
1
Position the baseplate on the wall. Keep it in the same place while
/
using a pencil to mark the two holes.
2
Drill two 25 mm deep holes with a 6 mm drill bit over the pencil
/
marks. If necessary, hammer in the plastic wall anchors to support
the screws.
3
Place the baseplate on the wall where you can see both holes
/
through the baseplate. Screw the screws into the wall to secure the
baseplate.
D-Link DCS-8000LHV2 User Manual

Mounting the Camera

11