ABB TPS 48D01 Operation Manual page 99

Operation Manual / TPS48-D/E.. - TPS61-D/E..
8 Disassembly and assembly / 8.5 Radial clearances N and R
Measuring N and R
Radial clearances N and R
[mm]
© Copyright 2020 . All rights reserved.
The mean values measured must be within the permissible values of the
radial clearance N and R.
TPS48
N minimum 0.22
N maximum 0.58
R minimum 0.47
R maximum 0.77
CAUTION
Clearances out of tolerance
Clearances out of tolerance and excessively worn components can be
the cause of serious damage to machinery and property.
Have components assessed and, if necessary, replaced by an ABB
u
Turbocharging Service Station.
HZTL2410_EN
TPS52 TPS57
0.30 0.40
0.67 0.86
0.59 0.75
0.92 1.11
Rev.F
TPS61
0.50
0.94
0.90
1.32
March 2020