Input Within A Project; Numeric Values - Siemens SIMATIC HMI OP 77B Operating Instructions Manual

2 S H U D W L Q J W K H 2 3   %

5.4 Input Within a Project

General procedure
Values are entered in the project input fields. They are
transferred from there to the PLC.
Proceed as follows:
Open the required screen.
 
Select the required input field from the screen.
 
Enter values of the following type in the input field
according to the configuration:
– Numeric
Alphanumeric
–
Symbolic
–
Date/Time
–
Enter value
 
Incorrect input can be canceled by pressing
The original value is then automatically restored.
Confirm input with
 

5.4.1 Numeric values

Entering numeric values
Numeric values are entered character by character
using the system keyboard. If a field already contains a
value, it is fully deleted from the field after entering the
first character of the new value using the numeric
keypad. The value can also be modified character by
character by pressing ENTER.
5–10
Release 03/2004
ENTER
Operating Instructions (Compact) OP 77B
6AV6691-1EA01-0AB0
ESC
.