Wlan (Wireless Local Area Network) Module Removal; Wlan Module Installation - Acer AOHAPPY2 Service Manual

WLAN (Wireless Local Area Network) Module Removal

Prerequisite:
Base Cover Removal
1. Find the WLAN module (B). Refer to
2. Disconnect main (A) and auxiliary (B) antenna cables from module (Figure 3-13).
Figure 3-13. WLAN Module
3. Remove one (1) screw (C) from the mainboard. Refer to
4. Remove the WLAN module from the mainboard connector (D). Refer to

WLAN Module Installation

1. Place the WLAN module into the mainboard connector (D). Refer to
2. Install and secure one (1) screw (C) to mainboard. Refer to
3. Install the main (A) and auxiliary (B) antenna cables on WLAN module. Refer to
Figure 3-13.
4. Install the base cover.
ID
Size
C M2.0*3.0 NI
Machine Maintenance Procedures
D
B
Figure 3-9.
C
A
Figure
Quantity
1
3-13.
Figure
Figure 3-13.
Figure 3-13.
Screw Type
0
3-13.
0
3-17