Table of Contents
Advertisement
4-1. Trouble Shooting
A picture does not appear on the monitor
correctly
Flow2
Though the power of DME-3000/
7000 is turned on, a picture does
not appear on the monitor
correctly.
Are the standard boards inserted
in the specified slots?
(Note)
If the standard board is not
inserted, a phenomenon shown
in the table 1 occurs.
YES
Are the optional boards inserted
in the specified slots?
(Note)
It is able to check whether or not
exist the board by the setup
menu (722 SYSTEM CONFIGU-
RATION).
YES
Are the input/output cables
connected correctly?
YES
Is the software of the optional
board installed correctly?
(Make sure whether or not to be
installed by the setup menu
(723 VERSION).)
YES
Does the LED of each board
light up correctly?
(Refer to the table 2.)
YES
Is the setting of the user define
mode correct?
(Is the whole area of the screen
cropped
(*3)
?)
YES
DME-3000/7000 is faulty.
(*3) : The crop effect shrinks the frame so that some area
of the picture is visible.
4-2 (E)
Insert the standard boards in
NO
the specified slots.
(Refer to the section 1-9.)
Insert the optional boards in the
NO
specified slots.
(Refer to the section 1-9.)
NO
Confirm the connection of the
input/output equipments.
NO
Install the software.
(Refer to the section 1-16.)
NO
The board that the LED does
not light up correctly is faulty.
Get the unit up and put it in
NO
factory set mode again, then
make sure whether or not a
picture appears on the monitor.
[Table 1 : Phenomenon if the standard board is not inserted]
Slot No.
Board name
1
CPU-114 board
(DME-3000)
CPU-196 board
(DME-7000)
3
MPU-70 board
8
DPR-35 board
(DME-3000)
DPR-70 board
(DME-7000)
9
VIF-6 board
or
VIF-9 board
[Table 2: LED indication]
Slot No. Board name
1
CPU-114 board
(DME-3000)
CPU-196 board
(DME-7000)
3
MPU-72 board
4
WKG-13 board
Phenomenon
A communication error occurred.
The whole area of the screen
with a single-color free runs
because of no reference.
No picture appears on the
monitor and the whole area of
the screen is dark. And a
picture does not move though it
moves.
If the BKGD (background) effect
is executed, the whole area of
the screen flashes.
The whole area of the screen is
green.
The BKGD (background) and
Non-linear effects can be operated.
No picture appears on the
monitor and the whole area of
the screen is green. And a
picture does not move though it
moves.
The BKGD (background) and
Non-linear effects cannot be
operated.
LED
ND301 (F-1):
If the RUN indicator displays
"66", the board is normal.
D2 (E-1):
If the RUN indicator lights up,
the board is normal.
D901 (D-7):
If the RUN indicator lights up,
the board is normal.
D902 (D-7):
If the VD indicator lights up, the
board is normal.
D100 (E-1):
If the CPU RUN indicator
lights up, the board is normal.
D101 (E-1):
If the GDC RUN indicator
lights up, the board is normal.
Advertisement
Table of Contents
