Sony VGX-XL2 User Guide (Computer Component) User Manual page 69

Communicate Using Ad Hoc Mode
Wireless Ad Hoc Connection
If Ad Hoc mode is used (connecting directly to another computer), the
wireless LAN devices can directly connect to each other without a wireless
LAN access point. Set the first computer to Ad hoc mode and then connect
the other computers to the first computer.
To create an Ad Hoc network
1 Select
area on the lower right desktop screen.
The wireless LAN turns on and the WLAN (wireless LAN) lamp turns green.
Or, If the icon is not displayed in the communication area, click Windows
Start, point to
Marvell
• From the Operation Mode screen, select
Radio Off check box is unchecked. Proceed to Step 4.
2 Select
area on the lower right desktop screen. The Select Operation Mode screen
displays.
3 Select
4 Click Windows
displays.
5 Click the
66
Turn Radio On by right-clicking the red icon in the taskbar notification
All Programs > Marvell
®
Wireless Soft_g_SoftAP Configuration
Select Mode by right clicking the red icon in the taskbar notification
Station in the Select Operation Mode screen and click OK.
Start and then click
Network and Internet Connections
®
Wireless SoftAP
Utility.
Station Mode
Control Panel. The Control Panel screen
icon.
VGX-XL2A Digital Living System
and then click
and make sure the