Download Print this page

Fujitsu ETERNUS LT140 Manual page 10

Hide thumbs Also See for ETERNUS LT140:

Advertisement

This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use,
and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely
high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"), including without
limitation, nuclear reaction control in nuclear facility, air craft flight control, air traffic control, mass transport control, medical life support system, missile launch control
in weapon system. You shall not use this Product without securing the sufficient safety required for the High Safety Required Use. If you wish to use this Product for High
Safety Required Use, please consult with our sales representatives in charge before such use.
The following notice is for EU users only.
WARNING: This is a product which meets Class A of EN55022. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
The following notice is for USA users only.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Laser Standard
The Fibre Channel printed circuit board contains a laser system (GBIC or GLM module). Laser systems are classified as Class I Laser Equipment by the radiation standards
of the Department of Health and Human Services (DHHS) in accordance with Radiation Control for Health and Safety Act of 1968 and also based on the safety
requirements for laser products in EN60825-1 (+All). The certificate of conformance is affixed to the module.
10
FUJITSU Storage ETERNUS LT140 Tape Library Read Me First
Copyright 2018 FUJITSU LIMITED
P3AG-3692-01EN

Advertisement

loading