Line Card LEDs
Note
The fabric cards are located behind the fan tray. Therefore, the fabric card LEDs are seen when the fan tray
is removed.
Table 18: Fabric Card LED Descriptions
LED
ATTN
(Attention)
STS
Line Card LEDs
The line card has LEDs located on the right of the front panel.
Table 19: Line Card LED Descriptions
LED
ATTN
(Attention)
Hardware Installation Guide for Cisco 8800 Series Routers
94
Color
Status
Flashing blue
The operator has activated this LED to identify this module in the chassis.
Off
This module is not being identified.
The fabric card is operational with no issues.
Green
Flashing green
Auto or manual FPD upgrade in-progress.
Amber
The module is in one of the following states:
• Power cycle
• Reload or reimage
• Shutdown
Flashing red
The fabric card has major or critical alarms.
Flashing
The module has minor alarm.
amber
Off
No power is going to the fabric card.
Color
Status
Flashing blue
The operator has activated this LED to identify this module in the
chassis.
Off
The line card is not enabled.
LEDs