• For replacement installations, carefully remove the existing faucet and clean the entire surface of the sink mounting holes. • Pioneer reserves the right to make changes in the design of faucets without notice as specified in the pricebook.
Faucet Installation • Clean lavatory surface (A) from oil, grease or debris. • Apply adequate amount of plumbers putty or sealant underneath of base plate. • Lead the faucet shank (B) through faucet holes. • Slide the mounting washers (C) through faucet shank (B). •...
Page 4
Pop-Up Drain Installation Remove the pop-up stopper (E) and pop-up flange (F) from the pop-up assembly. Apply adequate amount of plumbers putty underside of pop-up flange (F) then insert pop-up drain assembly from underside of the sink and secure the pop-up flange (F) from the top.
• Flush and allow water to run at full flow for at least one minute. • Replace aerator (P). For more care information or trouble shooting inquiries about your Pioneer product, please see the contact information on the back page.
Page 6
Engineering Excellence 3325 S. Garfield Ave | City of Commerce, CA 90040 Telephone: (800) 338-9468 | (323) 888-8873 | Fax: (323) 888-9515 Hours: M - F, 7:30am to 5:00pm PST...
This manual is also suitable for:
3cb101 series3pr100 series3am100 series3br100 series3br110 series3br130 series...
Show all