Advertisement
2.2 Power Switch
Power on:
Press the power button 1 second until the GPS status LED is on.
Power off:
Press the power button 1 second until the GPS status LED is off.
2.3 Power Jack
The power jack lets you to connect either a DC car power charger (included) or AC
power charger (included) to recharge the internal battery. Please note that the adapter rating
5V, 1.2 A, positive pole center.
2.4 LED Function
Bluetooth Status LED (Blue):
Blinking (Slowly) ---- Not connected to any Bluetooth device.
Blinking (Quickly) ---- Connected to other Bluetooth device.
GPS Status LED (Green):
Blinking ---- GPS position is fixed
Steady light ---- GPS position is not fixed
Battery Status LED (Red/Yellow):
Red ---- Battery power is critically low. Charge it immediately.
Yellow ---- Battery is charging now.
LED off ---- Battery is partially full or fully charged.
2.5 Power-saving Function
When you start the power of the Bluetooth GPS Receiver BT-332, if the Bluetooth is
not connected to any devices within 10 minutes, BT-332 will turn off the power automatically,
and all the LED will go off simultaneously.
6
Advertisement
