Advertisement
Available languages
Available languages
MN000805A01_ba.book Page 4 Monday, November 24, 2014 2:36 PM
ATTACHING TEMPLE TRANSDUCER TO
INTERFACE MODULE
1.
Insert the Temple Transducer's connector into
the accessory terminal of interface module.
2.
Securely tighten the waterproof ring.
NOTE:
Always ensure the waterproof ring is
securely tighten at all times, if the ring is
loose, waterproof function will be lost.
DETACHING TEMPLE TRANSDUCER
FROM INTERFACE MODULE
1.
Loosen the waterproof ring.
2.
Remove the Temple Transducer's connector
from the accessory terminal of interface module.
1
2
Attaching
Figure 4. Attaching and Detaching Temple Transducer
COMPATIBLE ACCESSORY
Part Number
PMLN6765_
PMLN6827_
OPTIONAL REMOTE PTT BUTTONS
Part Number
PMLN6767_
PMLN6830_
REPLACEMENT PART
Part Number
2
7580384M19
1
Detaching
MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M
logo are trademarks or registered trademarks of Motorola Trademark
Holdings, LLC and are used under license. All other trademarks are the
property of their respective owners.
© 2014 Motorola Solutions, Inc. All rights reserved.
4
Table 1: Compatible Accessory
Part Description
Tactical PTT/VOX Interface Module
Tactical PTT Interface
Table 2: Optional Remote PTT Buttons
Part Description
Tactical Remote PTT Body Switch
Tactical Remote PTT Ring Switch
Table 3: Replacement Part
Part Description
Rubber Temple Cover (1 pair)
Advertisement
