Frigidaire FEC450WH00 Use & Care Manual page 10

10
CONTROLS & OPERATION
5. "Fan"
5.1 In working mode, press to adjust the wind speed with 1 time
for low, 2 for medium, and 3 for high on the control panel.
5.2 Dry wind function:
a. In working mode, press and hold for 3 seconds to enter the dry wind
function. After starting the LED
minutes;
b. During the operation of the dry wind function, except for
keys, all other function keys are blocked (press the
seconds to exit the dry wind function).
c. After 20 minutes of high wind, the unit will automatically shut down and
enter working mode.
6. "Timer"
This is used to activate the timing function with a time range of
1-9 hours. The time duration increases by hours and is shown on
the digital display. In working mode, press this key to set the
power off time of the unit. The timer indicator and time indicator
will turn on and the digital display will flash to show the set time, indicating
that the timer is activated. At this moment, you can press the timer key to
set a different timing and press any button (except On/Off) or wait 5
seconds to exit the setting. After setting the timer, the digital display will
alternately show the set timing and the current wind speed at 10 seconds
intervals, and the wind speed indicator and time indicator will light on
accordingly. When the time lapse set reaches its end, the unit will shut
down and enter standby mode.
light will be on and flash for 20
and
key and hold for 3