Table of Contents
Advertisement
3 TROUBLESHOOTING
Before starting to troubleshoot, check the performance of the device as follows:
3.1.
Quick Performance Test
Reference
To check only the operation of the motor, you can listen to the sound of the motor rotating, even without using beaters, a power
meter, or an ammeter.
Procedure
1. Connect the unit to a power meter, the ammeter of a tester, or other such device.
2. Attach the beaters to the unit.
3. Set the switch in numerical order to 1, 2, 3, 4, and 5.
Check points
• Check to see if the motor rotates.
• Check to see that the beaters do not come into contact.
• Check to see that the rotation speed of the motor increases in synchronicity with the speed indicated for the switch position.
• The power consumption for each switch position is shown below.
Switch Position
Power Consumption
(Current value)
(0.30A approx.)
• The above values are common to 220V and 240V.
• Compared with the above values, the actual current will tend to be lower at 220V, and higher at 240V.
1
70W approx.
75W approx.
(0.33A approx.)
The shape of the power cord plug differs according to the country (and region).
2
3
85W approx.
(0.37A approx.)
4
4
95W approx.
110W approx.
(0.41A approx.)
(0.48A approx.)
5
Advertisement
Table of Contents
