Description Of The Appliance - AEG Inventum VVW6025A Instruction Manual

2

description of the appliance

3
1
1. On/off button - when the on/off button is pressed the control lamp in the Start/Pause button lights up.
2. Display - shows the remaining time of the program and remaining time during the program is in operation.
In addition, you can adjust program delay time by pressing the + button on the indicator before program starts. If you
want to change the delay time, you can set the time by pressing the Start/Pause button and using the + or - buttons
on the indicator. Press Start/Pause button again in order to activate. As soon as the delayed time has passed the
dishwasher will start the selected washing program.
3. Indicator light Wash - the indicator light will light up when the dishwasher is washing.
4. Indicator light Rinse - the indicator light will light up when the dishwasher is rinsing.
5. Indicator light Dry - the indicator light will light up when the dishwasher is drying.
6. Indicator light Ready - when the dishwasher has finished washing, rinsing and drying this indicator light lights up.
7. Child lock
- in order to activate the child lock, press the buttons + and - simultaneously for 4 seconds.
(CL) flashes in the display indicating the child lock is activated. To deactivate the child lock, press the buttons + and -
again simultaneously for 4 seconds. (CL) flashes twice to indicate the child lock is deactivated.
8. Handle - use the door handle to open and close the door of the dishwasher.
9. Tablet detergent button
salt and rinse aid, such as 3-in-1 tablets.
10.Prewash button
select a washing program. The selected washing program takes longer because of the Prewash and the temperature
can change. If you only want a prewash, make sure the program selector knob is on ● (Reset), press Prewash and
press Start.
11. Half load button
Just the lower basket, just the upper basket or both baskets.
If the dishwasher is not fully loaded and you want them washed, choose a program with half load. If you have
dishes in both baskets press the button till both lights are on.
If the dishes are only in the upper basket, press the button till just the top light is on. Make sure there are no
dishes in the lower basket.
If the dishes are only in the lower basket, press the button till just the bottom light is on. Make sure there are no
dishes in the upper basket or cutlery drawer.
12. Start/ Pause button
selector knob will start and the control lamp Wash lights up.
13. Program selector knob - select the desired washing program with this knob.
14.Control lamp for softening salt - the dishwasher checks if there is enough salt available. If not, the control lamp lights up
and you need to refill the salt reservoir.
15. Control lamp for rinse aid - the dishwasher checks if there is enough rinse aid available. If not, the control lamp lights up
and you need to refill the rinse aid reservoir.
4 5 6
2
7
- press the tablet detergent button when you use a combined detergent that include
with indicator light - press the button Prewash to improve the washing performance and
- Using this function you can choose three types of washing when the dishwasher is not full.
with control light - once you press this button, the program you selected with the program
8
9 10
14
15
13
11 12
English
33
•