Pioneer DMH-1500NEX Operation Manual

Pioneer DMH-1500NEX Operation Manual

Rds av receiver
Hide thumbs Also See for DMH-1500NEX:
Table of Contents

Advertisement

DMH-1500NEX
RDS AV RECEIVER
Operation Manual
Important (Serial number)
The serial number is located on the bottom of this unit. For your own security and convenience, be
sure to record this number on the enclosed warranty card.

Advertisement

Table of Contents
loading

Summary of Contents for Pioneer DMH-1500NEX

  • Page 1 DMH-1500NEX RDS AV RECEIVER Operation Manual Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
  • Page 2 Contents Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instructions, keep this document in a safe place for future reference.
  • Page 3 Theme settings..............................82 Audio settings ..............................84 Video settings ..............................90 ■ Favorite menu ................91 ■ Other functions................. 92 ■ Appendix ................... 94 - 3 -...
  • Page 4 FEDERAL COMMUNICATIONS COMMISSION SUPPLIER'S DECLARATION OF CONFORMITY Product Name: RDS AV RECEIVER Model Number: DMH-1500NEX Responsible Party Name: PIONEER ELECTRONICS (USA), INC. SERVICE SUPPORT DIVISION Address: 2050 W. 190TH STREET, SUITE 100 TORRANCE, CA 90504, U.S.A. Phone: 1-310-952-2915 URL: http://www.pioneerelectronics.com...
  • Page 5 • If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer - 5 -...
  • Page 6 • If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
  • Page 7 Parking brake interlock Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving.
  • Page 8 • To prevent data loss and damage to the storage device, never remove it from this product while data is being transferred. • Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
  • Page 9 Visit our website Visit us at the following site: http://www.pioneerelectronics.com http://www.pioneerelectronics.ca Register your product. Receive updates on the latest products and technologies. Download owner’s manuals, order product catalogs, research new products, and much more. Receive notices of software upgrades and software updates. Protecting the LCD panel and screen •...
  • Page 10 Parts and controls Main unit LCD screen VOL (+/ Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode. NOTE To activate the camera view mode with this button, set [Back Camera Input] to [On] or [AV Input] to [Camera] (page 75).
  • Page 11 Basic operation Resetting the microprocessor CAUTION • Pressing the RESET button resets settings and recorded contents to the factory settings. – Do not perform this operation when a device is connected to this product. – Some of the settings and recorded contents will not be reset. •...
  • Page 12 Touch [OK]. Initial Legal Disclaimer screen appears. Touch [OK]. The top menu screen appears. NOTE Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting (page 93). Switching the speaker mode To change the speaker mode, you need to restore this product to the default settings.
  • Page 13 Touching an item on the list allows you to narrow down the options and proceed to the next operation. Appears when all characters are not displayed on the display area. If you touch the key, the rests are scrolled for display. NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake.
  • Page 14 Skips files forward or backward. Performs fast reverse or fast forward. Displays setting menu screen (page 74). Closes the menu bar. Top menu screen Switches the top menu screen layout. Touch and hold appears at the top of the screen. Touch When you finish switching the layout, press Favorite source icons...
  • Page 15 AV operation area Displays the current source. Touch to go to the displayed source. TIPS • When the control icons are displayed at the bottom of the key, you can control the displayed operation. • You can also switch to display/hide the artwork with the following procedure. Touch and hold appears on the AV operation area.
  • Page 16 Bluetooth Bluetooth connection Turn on the Bluetooth function on the device. Press Touch then The Bluetooth screen appears. Touch [Connection]. Touch The unit starts to search for available devices, then displays them in the device list. Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system.
  • Page 17 CAUTION Never turn this product off and disconnect the device while the Bluetooth setting operation is being processed. Menu Item Description [Connection] Connect, disconnect, or delete registered Bluetooth device manually. Touch to delete registered device. To connect a registered Bluetooth device manually, touch the name of the device.
  • Page 18 registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen. • The icon for the cellular phone currently being used is displayed on the Phone menu screen.
  • Page 19 The following items are displayed. • Name of the current cellular phone • List number of the current cellular phone • Reception status of the current cellular phone • Battery status of the current cellular phone If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key.
  • Page 20 Touch Touch On the [Phone Book] screen, touch the desired name to display the contact’s phone number. Touch ▶Dialing from the preset dial list Touch Touch the desired entry on the list to make a call. The dial screen appears and dialing starts. ▶Deleting a phone number Press Touch...
  • Page 21 Press Touch Touch The voice recognition function launches and the voice control screen appears. TIPS • You can also launch the voice recognition function by pressing button. • If two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the voice recognition function (Siri Eyes Free Mode) will be set on the second phone.
  • Page 22 Touch to turn private mode on or off. NOTES • If two cellular phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone.
  • Page 23 ▶The received call and dialed number histories • You cannot make a call to the entry of an unknown user (no phone number) in the received call history. • If calls are made by operating your cellular phone, no history data will be recorded in this product.
  • Page 24 The Bluetooth audio playback screen appears. Basic operation Bluetooth audio playback screen Track number indicator Switches between playback and pause. Skips files forward or backward. • By pressing then touch , you can also skip files forward or backward. • By pressing then touch and hold , you can also perform fast reverse or fast forward.
  • Page 25 AV source Supported AV source You can play or use the following sources with this product. • Radio • USB The following sources can be played back or used by connecting an auxiliary device. • iPod • Spotify® • Pandora® •...
  • Page 26 Selecting a source Source on the AV source selection screen Press then touch Touch the source icon. When you select [Source OFF], the AV source is turned off. Source on the source list Press then touch the AV operation key. Touch Touch the source key.
  • Page 27 Adjusting the range of favorite source icons area NOTE This function is available only when you stop your vehicle in a safe place and apply the parking brake. Press Touch and hold appears at the top left of the favorite source icons. Drag to the desired position.
  • Page 28 Radio Starting procedure Press then touch Touch [Radio]. The Radio screen appears. Basic operation Radio screen Recalls the preset channel stored to a key from memory. Stores the current broadcast frequency to a key. Displays the preset channel list. Select an item on the list ([1] to [6]) to switch to the preset channel. Selects the FM1, FM2, FM3, or AM band.
  • Page 29 Manual tuning Seek tuning or non stop seek tuning Releasing the key in a few seconds skips to the nearest station from the current frequency. Keep holding the key for long seconds to perform non stop seek tuning. TIPS • By pressing then touch , you can also switch the preset channels.
  • Page 30 Menu Item Description [Local] Local seek tuning allows you to only tune into [Off] radio stations with sufficiently strong signals. FM: [Level1] [Level2] [Level3] [Level4] NOTES AM: [Level1] [Level2] • [Level4] for FM and [Level2] for AM are available only with the stations with the strongest signals.
  • Page 31 Compressed files Plugging/unplugging a USB storage device You can play compressed audio, compressed video, or still image files stored in an external storage device. Plugging a USB storage device Pull out the plug from the USB port of the USB cable. Plug a USB storage device into the USB cable.
  • Page 32 Plug the USB storage device into the USB cable (page 31). Touch [USB]. Playback is performed in order of folder numbers. Folders are skipped if they contain no playable files. Basic operation TIPS • By pressing then touch , you can also skip files/chapters forward or backward. •...
  • Page 33 Sets a repeat play range for all files/the current folder/the current file. Plays files or does not play in random order. Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left.
  • Page 34 Selects the previous folder or the next folder. Constructs the database for using the Music Browse mode (page 34). Switches the current music information display. ▶Selecting a file using Music Browse mode You can select files to play back using the category list if the files contain tag information.
  • Page 35 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. Switches between playback and pause. Performs fast reverse or fast forward. Touch again to change the playback speed. Stops playback. Performs frame-by-frame playback. Performs slow-motion playback. Sets a repeat play range for all files/the current folder/the current file.
  • Page 36 Skips files forward or backward. Still image source TIPS • Image files are not displayed in the rear display. • By pressing then touch and hold on the still image file, you can search through 10 image files at a time. If the file currently being played is the first or last file in the folder, the search is not performed.
  • Page 37 Rotates the displayed picture 90° clockwise. Sets a repeat play range for all files/the current folder. Plays all files in the current repeat play range or does not play them in random order. Switches the following media file types. [Music]: Compressed audio files [Video]: Compressed video files [Photo]: Image files Selects a file from the list.
  • Page 38 iPod Connecting your iPod When connecting an iPod to this product, the settings are automatically configured according to the device to be connected. For details of the compatiblity, refer to Compatible iPod/iPhone models (page 106). NOTES • Depending on the generation or version of the iPod, some functions may not be available. •...
  • Page 39 Displays the link search screen. Select a song from the list related to the song currently playing. If you touch the artwork, the list of songs in the album is displayed. NOTE This function is not available while playing Apple Music Radio. Switches between playback and pause.
  • Page 40 Audio source screen 2 Changes the audiobook speed. Normal—Fast—Slow Displays the hidden function bar. Apple Music Radio source Important Apple Music Radio may not be available in your country or region. For details about Apple Music Radio, visit the following site: http://www.apple.com/music/ NOTE This function is only available when using the iPod function with iOS 8 or higher (up to iOS 11) installed on iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus, iPhone 5s,...
  • Page 41 Displays the pop-up menu for Apple Music Radio. • Touch [Play More Like This] to play back songs similar to the current song. • Touch [Play Less Like This] to set it not to play back the current song again. •...
  • Page 42 Using WebLink Important • Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content. • The content and functionality of the supported applications are the responsibility of the App providers. • In WebLink, functionality through the product is limited while driving, with available functions determined by the App providers.
  • Page 43 Displays the main menu of the WebLink source screen. When the rear display is connected to this unit, video from the WebLink screen can be displayed to the rear display except while the AV source with video content is active even while driving. For iPhone users System requirement iOS 10.0 or higher (up to iOS 11.x)
  • Page 44 Refer to the Installation Manual. Press Touch Touch [WebLink]. Touch desired icon in the tab. The WebLink app is launched. Using the audio mix function You can output the audio mixing AV source and an application for iPhone when WebLink is used.
  • Page 45 • Apple CarPlay allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 46 Touch [Driving Position]. Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Connect an Apple CarPlay compatible device to this product via USB. Press Touch Touch [Apple CarPlay]. Touch Apple CarPlay icon in the tab. The application screen appears.
  • Page 47 Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.
  • Page 48 • Android Auto allows access to applications other than those listed that are subject to limitations while driving. • PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE INFORMATION.
  • Page 49 Touch [Driving Position]. Touch the item. [Left] Select for a left-hand drive vehicle. [Right] Select for a right-hand drive vehicle. Starting procedure Connect an Android Auto™ compatible device to this product via USB. Press Touch Touch [Android Auto]. Touch Android Auto icon in the tab. The application screen appears.
  • Page 50 Touch to mute. Touch again to cancel mute. Touch [+]/[-] to adjust the guidance volume. Displays the main sound volume. To adjust the main sound volume, press VOL (+/-) on the unit or touch [+]/[-]. NOTE The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The menu reappears.
  • Page 51 Pandora® Pandora Music is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com. The Pandora mobile application is available for iPhone and smartphones. Please visit www.pandora.com/everywhere/mobile for the latest compatibility information. WARNING Certain uses of the iPhone or smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions.
  • Page 52 Touch [Pandora]. Launch the Pandora application on the mobile device and start playback. NOTES • For details on Bluetooth connection, see page 16. • For details on USB connection, refer to the Installation Manual. Basic operation Playback screen Recalls the preset station stored to a key from the memory. Stores the current station to a key.
  • Page 53 Creates a new station. Touch [Track] or [Artist] to create a new station. Adds information for the track currently playing to bookmarks. Switches among connected devices. Selects a Pandora station from the list. • : Switches to the station list. •...
  • Page 54 • Certain functions of the Spotify service are not available when accessing the service through Pioneer car audio/video products. • Spotify is a music service not affiliated with Pioneer. More information is available at https://support.spotify.com/. • The Spotify application is available for most iPhone and smartphone, please visit https://support.spotify.com/ for the latest compatibility information.
  • Page 55 Touch then Touch [AV Source Settings]. Confirm that [Spotify] is turned on. Press then touch Touch [Spotify]. NOTES • For details on Bluetooth connection, see page 16. • For details on USB connection for iPhone, refer to the Installation Manual. Basic operation Playback screen 1 (Track) Switches between playback and pause.
  • Page 56 Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the right to the left. Switches among connected devices. Selects a track or station from the list. Your Music: Selects a track or station from the list of saved song information. Browse: Selects a track from the category list.
  • Page 57 Playback screen 1 (Radio mode) Switches between playback and pause. Skips tracks forward or backward. By pressing then touch , you can skip songs forward. NOTE The number of tracks that are skipped varies depending on the application. Starts new radio mode. Saves or deletes the current song information to or from Your Music.
  • Page 58 Playback screen 2 (Radio mode) Displays the hidden function bar. You can also display the hidden function bar by flicking the bar from the left to the right. Gives a Thumbs Up to the playing track. Gives a Thumbs Down to the playing track and skips to the next track. NOTE The number of tracks that are skipped varies depending on the application.
  • Page 59 SiriusXM® Satellite Radio Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy, and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and Subscription are required.
  • Page 60 Listening to SiriusXM Press then touch Touch [SiriusXM]. Basic operation TIPS • By pressing then touch , you can move the preset channels up or down on the current channel screen, and skip files forward or backward on the play time indicator screen. •...
  • Page 61 Performs TuneScan™ (page 62). Switches TuneMix™ to on or off. You can use TuneMix™ from each of the music channels stored as presets on the current band. NOTES • When fewer than two music channels are stored as presets, you cannot use TuneMix™.
  • Page 62 Selects a channel from the list. Select the category name or the list of all channels then touch the desired channel. To switch the display list, touch TIPS • The displayed list switches in the following order. Channel Name—Artist Name—Song Title—Content Info •...
  • Page 63 • TuneScan™ may take a few minutes to become available after the product is turned on or the preset band is changed. Touch to display the following display. Continues playing the current scanning song or channel. Skips to the previous/next song during TuneScan™ or to the previous/next channel during category scan.
  • Page 64 For details, see [Featured Favorites] and [Featured Band Update Message] in SiriusXM settings (page 64). How to access When there is a Featured Favorite, access it with the band key. Touch the band key. SXM1—SXM2—SXM3—FF When there are multiple Featured Favorites, access them from the category list. It is displayed at the bottom of the category list (page 62).
  • Page 65 Menu Item Description [Parental Control] Enter the current passcode then touch to set this function (the default passcode is 0000). • To edit the passcode, touch [Edit Code] then touch followed by entering the new passcode. • To lock the channel, touch the appropriate channel. appears and the channel is locked.
  • Page 66 Menu Item Description [SiriusXM Reset] Set to restore to the default Sirius XM settings by touching [Restore]. CAUTION Do not turn off the engine while restoring the settings. NOTES • This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
  • Page 67 You can display the video image output by the device connected to video input. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake. NOTE A Mini-jack AV cable (sold separately) is required for connection.
  • Page 68 Hides the touch panel keys. To display the keys again, touch anywhere on the screen. You can set the screen size for the video image (page 92). Switches between the video input and audio input. - 68 -...
  • Page 69 AV input You can display the video image output by the device connected to video or camera input. For details, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
  • Page 70 iDatalink Using iDatalink You can access the satellite radio source provided for the vehicle. The vehicle information and many OEM systems such as steering wheel controls, warning chimes, driver safety systems, and etc. can be displayed on this product by connecting the optional iDatalink adapter.
  • Page 71 NOTE When the serial number input is required, input the device number of this product. Install the vehicle/head unit specific firmware on your iDatalink Maestro module. Connect this product to iDatalink Maestro, and then install this product to the vehicle. The iDatalink function will be active.
  • Page 72 Displays the Climate screen. Displays the Parking Assist screen. Gauges screen Vehicle Information screen Climate screen - 72 -...
  • Page 73 Parking Assist screen Displaying obstacle detection information CAUTION This function is intended solely to assist the driver’s vision. It does not detect all dangers and obstacles and is not a substitute for your attentiveness, judgement, and care while parking your vehicle. NOTE This function is only available for vehicles equipped with a parking sensor system.
  • Page 74 Settings You can adjust various settings in the main menu. Displaying the setting screen Press Touch Touch one of the following categories, then select the options. System settings (page 74) Theme settings (page 82) Audio settings (page 84) Video settings (page 90) Bluetooth settings (page 16) System settings The menu items vary according to the source.
  • Page 75 [Auto Mix] Menu Item Description [Auto Mix] Select whether to perform mixing the sound output from [On] [Off] WebLink and AV source sound automatically. NOTE This function is only available when WebLink is used with an iPhone. [Input/Output settings] Menu Item Description [USB MTP] Select whether or not to activate USB MTP (Media Transfer...
  • Page 76 CAUTION Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed. • Immediately verify whether the display changes to the rear view camera image when the shift lever is moved to REVERSE (R) from another position.
  • Page 77 Menu Item Description [Parking Assist Guide Adjusting the guidelines by dragging or touching Adjust] on the screen. Touch [Default] to reset the settings. CAUTION • When adjusting the guidelines, park the vehicle in a safe place and apply the parking brake; this setting is available only when the vehicle is parked with the parking brake applied.
  • Page 78 [System Language] Menu Item Description [System Language] Select the system language. NOTES • If the embedded language and the selected language setting are not the same, the text information may not display properly. • Some characters may not be displayed properly. [Restore Settings] Menu Item Description...
  • Page 79 Menu Item Description [Touch panel calibration] Touch [Yes]. Touch two corners of the screen along the arrows then touch the centers of the two [+] marks at the same time twice. Press The adjustment results are saved. Press once again. Proceed to 16-point adjustment.
  • Page 80 Menu Item Description [Dimmer Duration] Adjust the time that the dimmer is turned on or off by dragging the cursors or touching You can use this function when [Dimmer Trigger] is set to [Time]. TIPS • Each touch of moves the cursor backward or forward in the 15 minute width.
  • Page 81 Menu Item Description [Brightness] Adjust the black intensity. [-24] to [+24] [Contrast] Adjust the contrast. [-24] to [+24] [Color]* Adjust the color saturation. [-24] to [+24] [Hue]* Adjust the tone of color (which color is emphasized, red, or [-24] to [+24] green).
  • Page 82 Menu Item Description [Firmware Update] CAUTION • The USB storage device for updating must contain only the correct update file. • Never turn this product off, disconnect the USB storage device while the firmware is being updated. • You can only update the firmware when the vehicle is stopped and the parking brake is engaged.
  • Page 83 Menu Item Description [Background] Select the wall paper from the preset items in this product or original pictures via the external device. The wall paper can be set from selections for the top menu screen and AV operation screen. The preset image located on the far left changes randomly depending on the playback song and the station.
  • Page 84 Audio settings The menu items vary according to the source. Some of the menu items become unavailable when the volume is set to mute. Menu Item Description [Graphic EQ] Select or customize the equalizer curve. [Super Bass (S.Bass)] Select a curve that you want to use as the basis of [Powerful] [Natural] customizing then touch the frequency that you want to [Vocal] [Flat] [Custom1]...
  • Page 85 Menu Item Description [Source Level Adjuster] Adjust the volume level of each source to prevent radical [-4] to [+4] changes in volume when switching between sources other than FM. Touch to adjust the source volume after comparing the FM tuner volume level with the level of the source.
  • Page 86 Menu Item Description [Time Alignment] Select or customize the time alignment settings to reflect [On] [Off] the distance between the listener’s position and each Listening Position*1*2 speaker. You need to measure the distance between the [Off] [Front Left] [Front head of the listener and each speaker unit. Right] [Front] [All] Touch to select the listening position then...
  • Page 87 Menu Item Description [Automatic Level Control] Corrects automatically the audio level difference between the music files or the sources. [Off] Turns the auto level control setting off. [Mode1] Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal).
  • Page 88 ▶Before operating the Auto EQ function • Perform Auto EQ in a quiet place with the vehicle engine and air conditioning switched off. Also, cut the power of car phones or cellular phones in the vehicle, or remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle’s acoustics.
  • Page 89 Disconnect the iPhone or smartphone device. Turn on the ignition switch (ACC ON). If the vehicle’s air conditioner or heater is turned on, turn it off. Switch the AV source to [Source OFF] (page 26). Press Touch then Touch [A-EQ&TA Measurement]. Connect the microphone for acoustical measurement (sold separately) with this product.
  • Page 90 NOTE [Subwoofer Settings] is available only when [Subwoofer] is [On]. Press Touch then Touch [Crossover] or [Subwoofer Settings]. Touch to switch the speaker. Drag the graph line to set the cutoff position. Drag the lowest point of the graph to set the cutoff slope. The following items can also be set.
  • Page 91 Favorite menu Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the [Favorites] screen. NOTE Up to 12 menu items can be registered in the favorite menu. Creating a shortcut Press then touch...
  • Page 92 Other functions Setting the time and date Touch the current time on the screen. Touch to set the correct time and date. You can operate the following items: Year, month, date, hour, minute. TIPS • You can change the time display format to [12hour] or [24hour]. •...
  • Page 93 [Trimming] An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. NOTE [Trimming] is for image files only. TIPS •...
  • Page 94 → The operation is not compatible with here, contact your dealer or the nearest the video configuration. authorized Pioneer service facility. Random playback in Music Browse mode is released in the USB storage device. Common problems →...
  • Page 95 polarity. Park in a safe place, then Sound from the iPod cannot be heard. while keeping your foot firmly on the → The audio output direction may switch brake, put the vehicle in reverse, automatically when the Bluetooth and access the System Settings menu, and USB connections are used at the same change the camera polarity setting.
  • Page 96 The screen is displayed, but operation your dealer or an authorized Pioneer does not work at all. Service Station for assistance. → An error has occurred. – Park your vehicle in a safe place, and...
  • Page 97 – Do not exceed the skip limit. your dealer or the nearest authorized – Spotify limits the total number of skips Pioneer service center for assistance. per hour. Check Tuner Check USB → The SiriusXM Connect Vehicle Tuner →...
  • Page 98 – Requires two or more qualified music Subscription Updated Press Enter to channels to be stored as presets in the Continue current band. → This product has detected a change in your SiriusXM subscription status. USB storage device – Touch [Enter] to clear the message. In the U.S.A., visit www.siriusxm.com or call 1-866-635-2349 if you have Error-02-9X/-DX...
  • Page 99 Pioneer Service Station. – Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and...
  • Page 100 If the error message is still displayed after instructions, please reconnect the performing the above action, please device. contact your dealer or an authorized Pioneer Service Station. Detailed information for playable media Android Auto Android Auto has stopped. → The connected device is not compatible Compatibility with Android Auto.
  • Page 101 • Partitioned USB storage device is not • Only one subtitle file can be used for each compatible with this product. DivX file. Multiple subtitle files cannot be • Firmly secure the USB storage device associated. when driving. Do not let the USB storage •...
  • Page 102 USB storage device FLAC compatibility CODEC FORMAT MP3, WMA, SAMPLING FREQUENCY 8 kHz to 192 WAV, AAC, FLAC, AVI, TRANSMISSION RATE 8 kbps to 24 MPEG-PS, MP4, kbps (CBR) 3GP, MKV, MOV, ASF, FLV, DivX compatibility M4V, MPEG-TS • This product is not compatible with the following: DivX Ultra format, DivX files MP3 compatibility without video data, DivX files encoded...
  • Page 103 Maximum frame rate 30 fps registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by PIONEER .mov CORPORATION is under license. Other trademarks and trade names are those of their Compatible video codec MPEG4, H.264,...
  • Page 104 contributors may be used to endorse or SiriusXM® Satellite promote products derived from this Radio software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE...
  • Page 105 MPEG-2 and MPEG-4. Several applications can be • Pioneer accepts no responsibility for data used to encode AAC files, but file formats lost from an iPod, even if that data is lost and extensions differ depending on the while using this product.
  • Page 106 Apple CarPlay Important Requirements to access app-based connected content services using this product: • Latest version of the Pioneer compatible connected content application(s) for the smartphone, available from the service provider, downloaded to your smartphone. Apple CarPlay is a trademark of Apple Inc.
  • Page 107 SPOTIFY and the Spotify logo are among the service by its provider. registered trademarks of Spotify AB. Compatible • Pioneer is not liable for any issues that mobile digital devices and premium may arise from incorrect or flawed app- subscription required, where available, see based content.
  • Page 108 cable and/or any other media), Liquid crystal display (LCD) broadcasting/streaming via internet, screen intranets and/or other networks or in other electronic content distribution systems, • If the LCD screen is near the vent of an air such as pay-audio or audio-on-demand conditioner, make sure that air from the applications.
  • Page 109 22 W × 4 (50 Hz to 15 kHz, 5 %THD, 4 Ω visible. In that case, please consult your LOAD, Both Channels Driven) dealer or the nearest authorized Pioneer Load impedance: Service Station. 4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch] allowable) Preout output level (max): 4.0 V...
  • Page 110 Frequency: USB Class: 1.25 kHz/1.6 kHz/2 kHz/2.5 kHz/3.15 MSC (Mass Storage Class), MTP (Media kHz/4 kHz/5 kHz/6.3 kHz/8 kHz/10 kHz/ Transfer Protocol) 12.5 kHz File system: FAT16, FAT32, NTFS Slope: <USB audio> -6 dB/oct, -12 dB/oct, -18 dB/oct, -24 MP3 decoding format: dB/oct MPEG-1 &...
  • Page 111 VC-1 video decoding format: S/N ratio: Simple Profile, Main Profile, Advanced 91 dBA (reference: 1 W into 4 Ω) Profile NOTE DivX: Specifications and design are subject to possible Home Theater modifications without notice due to MPEG4 video decoding format: improvements.
  • Page 112 © 2019 PIONEER CORPORATION. All rights reserved. <OPM_DMH1500NEXUC_en_C> UC...

Table of Contents