Table of Contents
Advertisement
screw tightly. Also, make sure that the accessory is fixed securely to the
product.
Do not use the Multi Interface Shoe with a commercially available flash that
applies voltage of 250 V or more or has the reverse polarity of the camera. It
may cause a malfunction.
When shooting with the flash and the zoom is set to W, the shadow of the lens
may appear on the screen, depending on the shooting conditions. If this
happens, shoot away from the subject or set the zoom to T and shoot with the
flash again.
[54] How to Use
Notes on using the flash
When using the flash, note the following points.
You cannot use the flash when recording movies.
While charging the flash, the
flash is finished, the indicator lights up.
When an external flash (sold separately) is attached to the Multi Interface Shoe,
the state of the external flash has priority over the flash setting of this product,
and you cannot use the internal flash of this product.
Do not use a commercially available flash with high-voltage synchro terminals
or with reverse polarity, it may cause a malfunction.
[55] How to Use
Flash Mode
You can set the flash mode.
1. MENU →
Menu item details
Using shooting functions
Using shooting functions
(Camera Settings) → [Flash Mode] → desired setting.
Using the flash
indicator flashes. When the charging of the
Using the flash
Advertisement
Table of Contents
