Table of Contents
Advertisement
ENGLISH
ENGLISH
ENGLISH
(Original instructions)
(Original instructions)
Fitting and removing the battery (Not supplied)
(fi g. B)
To fi t the battery, line it up with the receptacle on the tool.
u
Slide the battery into the receptacle and push up until the
battery snaps into place.
To remove the battery, push the release button (5) while at
u
the same time pulling the battery out of the receptacle.
Assembly
Warning! Before assembly, make sure that the tool is
switched off and the battery is removed.
Fitting sanding sheets (Fig. C )
Attach a sanding sheet (7) by pressing the 'hooked' velcro
u
side to the 'looped' velcro underside of the sanding base
(3).
Use
Warning! Let the tool work at its own pace. Do not overload.
Switching on and off
To switch the tool on, depress the on/off switch (1) at the
u
position I.
To switch the tool off, depress the on/off switch (1) at the
u
position O.
Technical data
V
Input voltage
dc
No - load speed
min
-1
°
Oscilating angle
mm
2
Sanding base surface
kg
Weight
Battery (not supplied)
Voltage
V
dc
Capacity
Ah
Type
Maintenance
Your BLACK+DECKER tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.Your charger does not require any
maintenance apart from regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
6
6
6
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
Regularly clean the ventilation slots in your tool and
u
charger using a soft brush or dry cloth.
Regularly clean the motor housing using a damp cloth.
u
Do not use any abrasive or solvent-based cleaner.
Regularly open the chuck and tap it to remove any dust
u
from the interior.
Protecting the environment
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product avail-
z
able for separate collection.
Service Information
Black & Decker offers a full network of company-owned and
BDCDS12
authorized service locations throughtout Asia. All Black &
12
Decker Service Centers are staffed with trained personnel to
provide customers with effi cient and reliable product service.
11000 OPM
Whether you need technical advice, repair, or genuine factory
2.8
replacement parts, contact the Black & Decker location near-
est to you.
5078
NOTE
0.63 (with battery 0.88)
Black & Decker's policy is one of continuous improve-
u
BDCB12
ment to our products and, as such, we reserve the right to
12
change product specifi cations without prior notice.
Standard equipment and accessories may vary by country.
1.5
u
Product specifi cations may differ by country.
u
Lithium-Ion
Complete product range may not be available in all
u
countries.
Contact your local Black & Decker dealers for range
availability.
Z
Batteries
There are no user servicable parts inside.
Separate collection. This product must not be
disposed of with normal household waste.
Separate collection of used products and packag-
ing allows materials to be recycled and used
again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
u
Advertisement
Table of Contents
