Advertisement
Power ON and OFF
„ Auto Power ON/OFF
The earphones are turned on automatically when you take them out from the charging case.
A "Power On" message is heard, and the Blue and Red indicator flash for left earphone. In
addition, attaching the earphones to the charging case turns off the earphones automatically,
and their charging starts.
Note
• When the earphones are turned on, the left and right earphones will be automatically
paired.
• Auto Power ON/OFF does not work when the charging case is not charged. When the
charging case is not charged, turn the power ON or OFF manually. See "Manual Power ON/
OFF" below for operating instructions.
„ Manual Power ON/OFF
Pressing and holding both of the multi-function buttons for 2seconds to turn ON and 4
seconds to turn OFF.
Once the earphones are turned on, a "Power On" message is heard, when turning off the
earphones, a "Power Off" message is heard.
Note
• When both of the earphones are paired through Bluetooth®, pressing either of the
multifunction buttons for 4 seconds turns off earphones simultaneously.
Using the Earbuds
„ Pairing
When using the earbuds for the first time, follow the procedure below to pair them.
1
The earbuds are turned on automatically when you take them out
from the charging case.
(You can also turn them on manually by pressing and holding both of the multi-
function buttons for 2 seconds.)
2
The left and right earphone are paired automatically.
The earphones start pairing with a Bluetooth® device. A "Pairing state" message is
heard, and the Blue and Red indicators on Left earphone flash.
3
Following the instructions in your device's user manual, activate
Bluetooth® on your device and search for "RZE-BT750E".
Select "RZE-BT750E" to complete pairing.
• Input the pass code "0000" if required. Once connected, a "connected" message is
heard from the both earphone.
Note
• The earphones are turned off if no device is paired for more than 3 minutes.
• If left and right earphone will not be paired automatically, follow the "
Clear the paired
device list stored in this earphone and reset the earphone section in this operation
manual.
„ Playing music on a Bluetooth® device:
Once your device and the earphone(s) are connected, you can listen to the music through
Bluetooth®.
1
Press the multi-function button of the right earphone 1 time to play
the music.
201104c1_RZE-BT750E_EN.indd
201104c1_RZE-BT750E_EN.indd
2
2
Note
• Operations may vary depending on your smartphone.
• To pause, press the function button of right earphone once.
• To track down, press the function button of the left earphone twice. To track up, press the
function button of the right earphone twice.
• To reduce the volume, press the function button of the left earphone three times. To
increase the volume, press the function button of the right earphone three times.
• To Voice Control, press the function button of left earphone once.
„ Pairing for the second time or later
The earphones are turned on automatically when you take them out from the charging case.
the earphones will automatically pair with the last paired device.
„ Clear the paired device list stored in this earphone and reset
the earphone
Firstly, disconnect and delete RZE-BT750E from Bluetooth list on your device. Clear the paired
device list stored in these earphones and reset the earphones after turning the power on by
holding the multi-function button down for 2 seconds, the earphones become in pairing
mode and red and blue indicators on left earphone flash, blue indicator on right earphone
flash. The power turns off by pressing the multi-function button of left and right earphone
quickly for 6 times and the red indicator flash and goes off. When the earphones are stored in
the charging case, the earphones will be cleared and reset.
Connect your device by following the instruction in your device.
Refer to "
pairing" section of this operation manual.
„ Voice Control
You can use your smartphone's voice control function with RZE-BT750E.
Caution
• Turn on your smartphone's voice control function.
1
Press the multi-function button of the left earphone once.
Your smartphone's voice control starts and you can hear a signal tone of the smartphone
that indicates the start of the voice control.
Speak out loud and describe what you want your smartphone to do or what you want
it to search for.
Caution
• The tone signal that indicates that the voice control function is on may differ depending
on your smartphone.
• The voice control operations may differ depending on your smartphone.
„ Answering a call
1
To answer an incoming call, press the multi-function button of either
left or right earphone once.
You can use the earphone as a speakerphone.
Note
• To reject a call, press and hold the multi-function button for 2 seconds.
• To reduce the volume, press the function button of the left earphone three times. To
increase the volume, press the function button of the right earphone three times.
2
To end the call, press the multi-function button of either left or right
earphone once.
Dialing a phone number:
1
Once the earphone is paired with a Bluetooth® mobile phone, use the
keypad on your phone to dial a phone number.
2
To end the call, press the multi function button of either left or right
earphone once.
Specifications
Bluetooth® section
Bluetooth® spec. Version 5.1
Supported profile HFP, HSP, A2DP, AVRCP
Service distance Up to 10 m
General
Frequency response 20 Hz - 20 kHz
Internal lithium polymer ion battery
Battery
Charging case: 600 mAh / Earbud: 50 mAh × 2
Charging time Charging case: Approx. 2 hrs / Earphone: Approx. 2 hrs
Charging voltage DC 5V (Type-C USB charging)
Drive impedance 16 ohm
Dimension Charging case: 62 × 51 × 28 mm (W × H × D)
Type-C USB cable x 1, Earpiece S/M/L x 1 set,
Accessories
Operation manual x 1
This user manual may be changed without prior notice to improve product performance.
The images included in this guide may differ from the actual image and may change without
notice.
1-1-8, Sotokanda, Chiyoda-ku Tokyo 101-0021, Japan
2020/11/04
2020/11/04
8:40:27
8:40:27
Advertisement
