Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Asus VA24ECE Series
Summary of Contents for Asus VA24ECE Series
- Page 1 VA24ECE Series LCD Monitor User Guide...
-
Page 2: Table Of Contents
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing. -
Page 3: Tco Certified
TCO certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. -
Page 4: Notices
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer’s instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Canadian Department of Communications Statement This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. - Page 5 Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. • Before using the product, make sure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately. • Slots and openings on the back or top of the cabinet are provided for ventilation. Do not block these slots. Never place this product near or over a radiator or heat source unless proper ventilation is provided. • The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your dealer or local power company. • Use the appropriate power plug which complies with your local power standard. • Do not overload power strips and extension cords. Overloading can result in fire or electric shock. • Avoid dust, humidity, and temperature extremes. Do not place the monitor in any area where it may become wet. Place the monitor on a stable surface. • Unplug the unit during a lightning storm or if it will not be used for a long period of time. This will protect the monitor from damage due to power surges. •...
- Page 6 Declaration of Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU). This product has been tested and found to comply with the harmonized standards for Information Technology Equipment, these harmonized standards published under Directives of Official Journal of the European Union. WEEE Symbol Statement This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
- Page 7 WARNING Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures. Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature. Stability Hazard. The product may fall, causing serious personal injury or death. To prevent injury, this product must be securely attached to the floor/wall in accordance with the installation instructions. A product may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such ALWAYS use cabinets or stands or installation methods recommended by the manufacturer of the product set. ALWAYS use furniture that can safely support the product. ALWAYS ensure the product is not overhanging the edge of the supporting furniture. ALWAYS educate children about the dangers of climbing on furniture to reach the product or its controls. ALWAYS route cords and cables connected to your product so they cannot be tripped over, pulled or grabbed. NEVER place a product in an unstable location. NEVER place the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support. NEVER place the product on cloth or other materials that may be located between the product and supporting furniture. NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the product or furniture on which the product is placed. If the existing product is going to be retained and relocated, the same considerations as above should be applied.
-
Page 8: Care & Cleaning
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner. • Avoid using a cleaner containing alcohol or acetone. Use a cleaner intended for use with the LCD. Never spray cleaner directly on the screen, as it may drip inside the monitor and cause an electric shock. The following symptoms are normal with the monitor: • The screen may flicker during the initial use due to the nature of the fluorescent light. Turn off the Power Switch and turn it on again to make sure that the flicker disappears. • You may find slightly uneven brightness on the screen depending on the desktop pattern you use. • When the same image is displayed for hours, an afterimage of the previous screen may remain after switching the image. The screen will recover slowly or you can turn off the Power Switch for hours. • When the screen becomes black or flashes, or cannot work anymore, contact your dealer or service center to fix it. Do not repair the screen by yourself! Conventions used in this guide WARNING: Information to prevent injury to yourself when trying to complete a task. -
Page 9: Takeback Services
Where to find more information Refer to the following sources for additional information and for product and software updates. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package. Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for our customers to be able to responsibly recycle our products, batteries and other components as well as the packaging materials. Please go to http://csr.asus.com/english/Takeback.htm for detail recycling information in different region. ASUS LCD Monitor VA24ECE Series... -
Page 10: Welcome
Welcome! ® Thank you for purchasing the ASUS LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you! Package contents Check your package for the following items: LCD Monitor Monitor Base Quick Start Guide Warranty Card 1x Power Cord * 1x HDMI Cable (optional) * 1x Type-C Cable (optional) • If any of the above items is damaged or missing, contact your retailer immediately. • * Also the Replaceable parts required by the TCO Certified. Chapter 1: Product Introduction... -
Page 11: Assembling The Monitor
Assembling the monitor To assemble the monitor: Place the monitor stand base on a stable table top, Slide the monitor stand body in the correct direction down onto the stand base. Align the stand assembly bracket to the monitor groove.Insert the bracket towards monitor until it locks in place. Adjust the monitor to the angle that is most comfortable for you. -5 ~ 23 ASUS LCD Monitor VA24ECE Series... -
Page 12: Connect Cables
Connect cables 1.4.1 Rear of the LCD monitor HDMI AC-IN Port HDMI Port USB Type-C Port Audio out Kensington Lock Chapter 1: Product Introduction... -
Page 13: Installaion
Installaion Turn off your computer and unplug your computer's power cord. Connect the signal cable to the HDMI (optional) input socket of the monitor, and the HDMI (optional) (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector. USB Type C Cable (Optional, USB Type C input models only) Connect one end of the USB type C cable (optional) to your computer and connect the other end to your electric devices. Insert the monitor power cable into the power port at the back of the monitor. Plug the power cords of your computer and your monitor into a nearby electrical outlet. AC IN HDMI Type-C ASUS LCD Monitor VA24ECE Series... - Page 14 • POWER CORD specifications refer to page v. • For the installation of replaceable parts, please refer to the above installation instructions. • Users may go to the local service network to replace /purchase the qualified replaceable parts. • For local service centers and service contacts, please refer to https://www.asus.com/support Chapter 1: Product Introduction...
-
Page 15: Six Sides Figure
1.4.2 Six sides figure ASUS VA24ECE Series UNIT:mm(inch) ASUS LCD Monitor VA24ECE Series... -
Page 16: Monitor Introduction
Monitor introduction 1.5.1 Using the Controls button Use the control button on the back of the monitor to adjust the image settings. Menu Button / Close: • Press this Button enter the OSD menu. • Exit the OSD menu. • Return to previous menu. • Key Locked Hot key(*Note1) Close / Return Button: • Exit the OSD menu. • Enter/select the icon (function) highlighted while the OSD is activated. Input source hot key/Increase value: • Add or Increase value • Input source hot key Brightness hot key/Decrease value: • Next Item or Decrease value • Brightness hot key Power Button: • Power on/off monitor when monitor is power off/on. Chapter 1: Product Introduction... -
Page 17: Detaching The Arm/Stand (For Vesa Wall Mount)
Detaching the arm/stand (for VESA wall mount) The detachable stand of this monitor is specially designed for VESA wall mount. To detach the arm/stand Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table. Remove the base/stand from the monitor. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • The VESA wall mount kit ( 100 x 100 mm) is purchased separately. • Use only the UL Listed Wall Mount Bracket with minimum weight/load 12 kg (Screw size: M4 x 10 mm). ASUS LCD Monitor VA24ECE Series... -
Page 18: Adjusting The Monitor
Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from +23˚ to -5˚. -5 ~ 23 It is normal that the monitor slightly shakes while you adjust the viewing angle. Chapter 2: Setup... -
Page 19: Osd (On-Screen Display) Menu
Standard Mode HDMI 1080p 60Hz Standard Mode sRGB Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode Press the MENU button to activate the OSD menu. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. To select the highlighted item on the menu press the Center key. Press the and buttons to select the desired parameter. Press the Center key to enter the slide bar and then use the or buttons, according to the indicators on the menu, to make your changes. ASUS LCD Monitor VA24ECE Series... -
Page 20: Osd Function Introduction
3.1.2 OSD Function Introduction Splendid This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. ASUS VA24ECE Splendid Standard Mode HDMI 1080p 60Hz Standard Mode sRGB Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode • Standard Mode: This is the best choice for document editing with SPLENDID™ Video Intelligence Technology. • sRGB Mode: This is the best choice for viewing photos and graphics from PCs. - Page 21 Blue Light Filter: In this function, you can adjust the blue light filter from 0 to max. 0: no changes；Max: The higher the level, the less blue light is scattered. When blue light filter is activated, the default settings of Standard Mode will be automatically imported. Besides maximum level, the brightness is user-configurable. Maximum is the optimized setting. It is compliance with TUV low blue light certification*. The brightness function is not user configurable. • When the user adjusts blue light filter bar to maximum level. • *When color augmentation is in default value (50). • Rest Reminder: This function provides you a rest reminder according to how long you set for your working time. For example, a user sets 60 minutes working time and there will be a pop up reminder appeared on the upper left corner of the monitor for 5 seconds. Press any key to make this reminder OSD disappeared. • When this function is enable, the following functions are not available: Splendid Demo Mode, GamePlus and QuickFit. • Color Augmentation: The adjusting range of color enhancement is from 0 to 100. • This function is not available in sRGB mode under Splendid. • This function is not available when Reddish or Yellowish is selected in the Skin Tone menu. ASUS LCD Monitor VA24ECE Series...
- Page 22 Color Select the image color you like from this function. ASUS VA24ECE Color Standard Mode HDMI 1080p 60Hz Brightness Contrast Saturation Color Temp. Skin Tone • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100. • Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode. • Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish. • In the User Mode, colors of R (Red), G (Green), and B (Blue) are user- configurable; the adjusting range is from 0 ~ 100. Chapter 3: General Instruction...
- Page 23 Standard Mode HDMI 1080p 60Hz Sharpness Trace Free Aspect Control VividPixel ASCR FreeSync • Sharpness: Adjusts the picture sharpness. The adjusting range is from 0 to 100. • Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100. • Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”. • VividPixel: ASUS Exclusive Technology that brings lifelike visuals for crystal-clear and detail-oriented enjoyment. The adjusting range is from 0 to 100. • ASCR: Select ON or OFF to enable or disable dynamic contrast ratio function. • FreeSync: It can allow a FreeSync supported graphics source to dynamically adjust display refresh rate based on typical content frame rates for power efficient, virtually stutter free and low-latency display update. • 4:3 is only available when input source is in 4:3 format. ASUS LCD Monitor VA24ECE Series...
- Page 24 Input Select Select the input source from HDMI, USB Type-C input signal. ASUS VA24ECE Input Select Standard Mode HDMI 1080p 60Hz HDMI USB Type-C System Setup Adjusts the system configuration. ASUS VA24ECE System Setup Standard Mode HDMI 1080p 60Hz Splendid Demo Mode Volume GamePlus QuickFit ECO Mode USB Charging...
- Page 25 To active GamePlus: Select ON to enter the GamePlus main menu. • • Press to select between Crosshair, Timer, FPS Counter, Display Alignment, Snellen Chart, Amslter Grid and Astigmatism function. • Press Center key to confirm the function you choose. Press to go back. Press to go off, and exit. GamePlus main menu GamePlus-Crosshair Crosshair (Practice Mode) Timer FPS Counter Display Alignment GamePlus main-Timer GamePlus -FPS • QuickFit: contains three patterns: (1) Grid (2) Paper size (3) Photo size. Grid pattern: Facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel. ASUS LCD Monitor VA24ECE Series...
- Page 26 Alignment Grid 1 Alignment Grid 2 Paper size: Provides users to view their documents in real size on the screen. Letter Letter EXIT EXIT Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen. 8x10 • ECO Mode: Activate the ecology mode for power saving. • USB Charging: Turn On/Off USB charging function during the standby mode. • OSD Setup: Adjusts the OSD Timeout, DDC/CI, and Transparency of the OSD screen. • More: Return the next page of System Setting. • Back: Return the previous page of System Setting. Chapter 3: General Instruction...
- Page 27 • Power Key Lock: To disable / enable power key • All Reset: Selects “Yes” to revert all settings to the factory default mode. Shortcut Selecting this option allows you to set one shortcut key. ASUS VA24ECE Shortcut Standard Mode HDMI 1080p 60Hz Shortcut 1 Input Select Shortcut 2 • Shortcut 1: User can select from “Blue Light Filter” “Splendid”, “Brightness”, “Contrast”, “Input Select”, “Color Temp.”, “QuickFit”, “GamePlus”, and set as shortcut key. The default setting is Input Select. • Shortcut 2: User can select from “Blue Light Filter” “Splendid”, “Brightness”, “Contrast”, “Input Select”, “Color Temp.”, “QuickFit”, “GamePlus”, and set as shortcut key. The default setting is Brightness. ASUS LCD Monitor VA24ECE Series...
-
Page 28: Specifications
Specifications Model VA24ECE Panel Size 23.8”W Max. Resolution 1920x1080 Brightness (Typ.) 250cd/m Intrinsic Contrast Ratio 1000:1 (Typ.) Viewing Angle (CR>10) 178°(V) /178°(H) Display Colors 16.7 M(6bit+FRC) Response Time 5ms (G To G ) Satellite Speaker Earphones Sound from HDMI/Type-C HDMI input Type-C input D-sub input DVI input Audio Line-in < 18W* Power ON Consumption *Measuring a screen brightness of 200 nits without audio/ Note USB/ Card reader connection Chassis Colors Black < 0.5W Power saving mode < 0.3W Power off mode Tilt... -
Page 29: Troubleshooting (Faq)
ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent. • Connect the computer with another available monitor to check if the computer is properly working. Screen image is too light or dark • Adjust the Contrast and Brightness settings via OSD. Screen image bounces or a wave • Make sure the signal cable is properly connected to pattern is present in the image the monitor and the computer. • Move electrical devices that may cause electrical interference. Screen image has color defects • Inspect the signal cable and make sure that none of (white does not look white) the pins are bent. • Perform Reset via OSD. • Adjust the R/G/B color settings or select the Color Temperature via OSD. ASUS LCD Monitor VA24ECE Series 3-11... -
Page 30: Supported Timing List
Supported Timing List PC Timing H Pixels V Pixels Frame Rate HDMI Type-c 1024 1024 1024 1280 1024 Standard Timing H Pixels V Pixels Frame Rate HDMI Type-c 1280 1280 1024 1440 1152 1280 1680 1050 Vedio Timing H Pixels V Pixels Frame Rate HDMI... - Page 31 Detail timing H Pixels V Pixels Frame Rate HDMI Type-c 1920 1080 1920 1080 3-13...