Page 1
OWNER’S MANUAL Safety and Reference Wall Mount Bracket Please read this manual carefully before operating your set and retain it for future reference. WB21LGB Printed in Korea *MFL71772303* www.lg.com Copyright 2021 LG Electronics Inc. All Rights Reserved. (2108-REV04)
Accessories Precautions for Safety - Professional installers should read this manual carefully to ensure proper installation. - Professional installers should forward this manual to customers after installation and encourage them to read and store it in a convenient place for future reference.
• Install the product only on a vertical wall. Do not install on a tilted wall that exceeds building standards or on the heavily titled wall or ceiling. LG is not responsible for problems caused by improp- er installation of the product, e.g., heavily tilted walls and ceilings.
How to install • Check the enclosed accessories before installation. We are not responsible for any lost or damaged accessories after the inner packaging is opened. • The appearance of tools may differ from the en- • When an infant or small child swallows the enclosed closed images.
Page 5
For installation on concrete wall 2. Attach the guide paper to the wall when determin- ing the TV’s installation site. - Ensure the guide paper is level when attaching it to 1. Drill holes in anchor locations with a drill bit of Ø 8 the wall.
Page 6
4. Assembling the wall surface sup- 5. Tighten screws for fixing the wall mount to the holes. At this time, tighten the screws with the port and wall mount support torque more than 45 kgf/cm (39.0 lbf/in) to 60 kgf/ cm (52.0 lbf/in).
Page 7
5. Installing the wall mount supports and the wall surface supports: By coun- try or region North America (406 mm (15.9 inches)) 1. 86-Inch model 2. 75-Inch model...
Page 8
Japan (455 mm (17.9 inches)) 1. 86-Inch model 2. 75-Inch model...
Page 9
Australia (600 mm (23.6 inches)) 1. 86-Inch model 2. 75-Inch model...
Page 10
6. Installing wall surface supports 3. Remove the guide paper. and wall mount supports 1. Install the wall mount support at the location marked on the guide paper. Insert the wall mount fixing screws into the wall mount supports by matching the holes.
Page 11
3. Fasten the TV to the support using the TV fixing 5. Once the wall mount and cushions are attached screws. to the TV, install it on the wall with wall support - Warning: When mounting the product, do not use attached.
Page 12
8. Plugging Additional Cables in 6. Push the TV close to the wall. - Be sure to gently push the upper and lower parts of While Using the TV the TV so that the pushing doesn't affect the TV. - Gently push the upper center of the TV once again 1.
Page 13
3. Push the TV until it makes close contact with the wall. - Push the left side of the TV to balance it, and then gently push the top and bottom parts of the TV so that it does not affect the product. - Gently push the upper center of the TV once again until it's completely pressed against the wall.