Mitsubishi Electric FR-F802-E Instruction Manual page 10

1.2
Inverter component names
Component names are shown below.
(b)
(a)
(c)
(d)
(e)
(f)
Symbol Name
(a) Plug-in option connector 1
(b) Plug-in option connector 3
(c) Plug-in option connector 2
(d) Voltage/current input switch (SW2)
(e) Ethernet communication connector Connect the Ethernet dedicated cable for connection to the network.
(f) Control circuit terminal block
(g) PU connector
(h) USB A connector
(i) USB mini B connector
(j) Front cover (upper side)
(k) Power lamp
(l) Alarm lamp
(m) Charge lamp
(n) Operation panel (FR-DU08)
(o) Front cover (lower side)
(p) Main circuit terminal block
(q) Cooling fan
Switches for manufacturer setting
(r)
(SW3 and SW4)

Refer to the FR-F800 Instruction Manual (Detailed)
(g)
(h)
(i)
(r)
(j)
(k)
(l)
(n)
(m)
(o)
Connects a plug-in option or a communication option.
The connector 2 cannot be used because the Ethernet board is installed in
the initial status. The Ethernet board must be removed to install a plug-in
option to the connector 2. (However, Ethernet communication is disabled in
that case.)
Selects between voltage and current for terminal 2 and 4 inputs.
Connects cables for the control circuit.
Connects the operation panel (FR-DU08) or the parameter unit (FR-PU07).
This connector also enables the RS-485 communication.
Connects a USB memory device.
Connects a personal computer and enables communication with FR
Configurator2.
Remove this cover for wiring to the control circuit terminals, installation of a
plug-in (communication) option, switching of the voltage/current input switch,
etc.
Stays ON while the power is supplied to the control circuit (R1/L11, S1/L21).
Turns ON when the protective function of the inverter is activated.
Stays ON while the power is supplied to the main circuit.
Operates and monitors the inverter.
Remove this cover for wiring.
Connects cables for the main circuit.
Cools the inverter.
Do not change the initial setting (OFF
Inverter component names
Description
OFF ).
ON
INTRODUCTION
(q)
(p)
Refer to
page
Instruction
Manual of
the option
1
49

49
34
48
50
50
15
29
77
30

15
30
88
─
9