Before Use - Panasonic nanoe EH-HS0E Operating Instructions Manual

Before use

Heating the iron plate
1
1
Release the Open/Close
Lock.
2
2
Insert the plug into the household outlet.
3
3
Press the Power Switch to
turn on the straightener.
• The nanoe™ Lamp glows.
• Confi rm that the Temperature
Setting Lamp for 150 is blinking.
►Note
• Do not use the straightener if all the Temperature
Setting Lamps are blinking.
4
4
Set a temperature by using
the Temperature Setting
Switches according to the
characteristics and
condition of your hair.
• When you use the straightener for the fi rst time, be sure
to set the temperature to 150 °C.
• The temperature is raised using [+] and lowered using [–]
of the Temperature Setting Switches.
Indicator Temperature
Approx. 230 °C
Approx. 200 °C
Approx. 180 °C
Approx. 170 °C
Approx. 150 °C
• Confi rm that the Temperature Setting Lamp has
changed.
• When the selected Temperature Setting Lamp stops
blinking (and glows), the straightener has reached the
selected temperature.
(Note that the time taken to reach operating temperature
may vary depending on the operating environment.)
►Notes
• A temperature level of more than 200 is high and may
damage your hair.
We recommend that you avoid continuous lengthy use
of this level, and only use it if your hair is in a suitable
condition.
• After switching on, the straightener reaches operating
temperature (approximately 100 °C) after about
20 seconds.
Hair
Hair type
condition
Less
Wavy
damaged
Straight Damaged
11