Epson L351 Service Manual page 69

L350/L300/L355/L210/L110 Series
Section A (See Cross-section view.)
Scanner Carriage
Figure 4-15. Lubrication of the Scanner Carriage (1)
Maintenance
Cross-section of section A
CIS Module Unit
Application Point
Section A (See Cross-section view.)
<Part supply as ASP>
Supplied as the Scanner
Enlarged figure
Unit
<Lubrication status when
supplied as ASP>
Lubricated
<Lubrication Point>
Contact points (x6) on the
Scanner Carriage with the
CIS Module Unit
<Type>
G-74
<Application Amount>
Appropriate amount
<Remarks>
Apply with flux
dispenser.
Stir G-74 before use.
For section A, apply
grease over the area
shown in the Cross-
section view.
Lubrication Points and Instructions
Apply on the
center of inner
wall (x4 points).
Scanner Carriage
Figure 4-16. Lubrication of the Scanner Carriage (2)
Panel Stand
Figure 4-17. Lubrication of the Panel Stand
Revision B
<Part supply as ASP>
Supplied as the Scanner
Unit
<Lubrication status when
supplied as ASP>
Lubricated
<Lubrication Point>
On inner wall surfaces (x4)
on the groove of the
Scanner Carriage
<Type>
G-45
<Application Amount>
0.01 g x 4 points
<Remarks>
Using injector, apply
grease on inner wall
surfaces (x4) on the
groove shown in the
enlarged figure.
Be careful not to let
grease flow over.
Application Point
<Part supply as ASP>
Supplied as the Panel Unit
<Lubrication status when
supplied as ASP>
Lubricated
<Lubrication Point>
Shafts (x4) of the Panel
Stand
<Type>
G-74
<Application Amount>
Appropriate amount
<Remarks>
Using flux dispenser,
apply all over the shafts
shown in the figure.
Stir G-74 before use.
Application Point
69
Confidential