Connection Information; Exterior Features - Toshiba TOSVERT VF-MB1 Function Manual

3. Connection Information

This option allows the VF-MB1/S15/AS3 drive to be communicated with the cyclic
command transmission and monitoring of the original profile ("Vendor spec.", refer to
Section 7) of our company other than application profile "Profile for Variable Speed Drives
PROFIdrive (3.072), refer to Section 6" which PROFIBUS defines.
When you use VF-MB1, the shielding is connected to the drive ground. When you use
VF-S15, the shielding is connected to the grounding terminal of option adapter.

3.1. Exterior features

Status LED indicator
(Refer to Section 3.2)
To align VF-MB1/S15/AS3 side-by-side horizontally, "Vertical" type PROFIBUS connector
is necessary.
- 8 -
E6581738④
Release Tab
P ROFIBUS connector
(D-Sub 9pin)