LG 32LC55 Owner's Manual

Hide thumbs Also See for 32LC55:

Service manual (44 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

Table of Contents

Quick Links

Summary of Contents for LG 32LC55

Page 1 I I D D N N u u m m b b e e r r ( ( s s ) ) : : 4550: 26LC45 4549: 26LC46 4548: 32LC45 4547: 32LC46 4546: 37LC45 4545: 37LC46 4544: 42LC45 4543: 42LC46 4542: 32LC55 4541: 32LC56 4540: 26LC55 4539: 37LC55 4538: 42LC55 4559: 42PC55 4555: 50PC55 4554: 42PC56...
Page 3 ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. Owner's Manual Owner’s manual Owner’s Manual Remote Control P P l l a a s s m m a a T T V V m m o o d d e e l l s s 2-eye-bolts 2-Wall brackets L L C C D D T T V V m m o o d d e e l l s s...
Page 4 CONTENTS ACCESSORIES PREPARATION PICTURE CONTROL EXTERNAL EQUIPMENT SETUP WATCHING TV / PROGRAMME CONTROL...
Page 5: Table Of Contents
SOUND & LANGUAGE CONTROL Auto Volume Leveler ......68 Preset Sound Settings - Sound Mode ..69 Sound Setting Adjustment - User Mode .
Page 6: Front Panel Controls
PREPARATION FRONT PANEL CONTROLS This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth.
Page 7 LCD TV Models Remote Control Sensor PROGRAMME Buttons VOLUME Buttons OK Button MENU Button MENU INPUT Button INPUT POWER Button Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
Page 8: Back Panel Information
PREPARATION BACK PANEL INFORMATION This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. Plasma TV Models D SLOT EJECT PCMCIA CARD SLOT HDMI IN VIDEO ANTENNA HDMI IN COMPONENT IN VIDEO AUDIO COMPONENT IN RS-232C IN...
Page 9 LCD TV Models HDMI IN CARD SLOT AC-IN AV 1 RGB IN VIDEO AUDIO VARIABLE COMPONENT IN AUDIO OUT AUDIO VARIABLE AUDIO OUT PCMCIA (Personal Computer Memory Card International Association) Card Slot (This feature is not available in all countries.) HDMI Input Connect a HDMI signal to HDMI IN.
Page 10 PREPARATION STAND INSTALLATION Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. Assemble the product stand with the product as shown. Install the 4 bolts securely, in the back of the product in the holes provided.
Page 11: Attaching The Tv To A Wall
ATTACHING THE TV TO A WALL Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction.
Page 12: Back Cover For Wire Arrangement
PREPARATION BACK COVER FOR WIRE ARRANGEMENT Plasma TV models Hold the C C A A B B L L E E M M A A N N A A G G E E M M E E N N T T with hands and push it as shown. Connect the cables as necessary.
Page 13: How To Remove The Cable Management
LCD TV models Connect the cables as necessary. To connect an additional equipment, see the E E x x t t e e r r n n a a l l e e q q u u i i p p m m e e n n t t C C o o n n n n e e c c t t i i o o n n s s section. Install the C C A A B B L L E E M M A A N N A A G G E E M M E E N N T T as shown.
Page 14 PREPARATION The set can be installed in various ways such as on a wall, or on a desktop etc. The set is designed to be mounted horizontally. GROUNDING Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not pos- sible, have a qualified electrician install a separate circuit breaker.
Page 15: Antenna Connection
To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. An antenna cable and converter are not supplied. Multi-family Dwellings/Apartments Wall (Connect to wall antenna socket) Antenna Socket Outdoor...
Page 16: External Equipment Setup
EXTERNAL EQUIPMENT SETUP To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.However,if you do receive Digital signals from a digital set-top box or other digital external device,refer to the figure as shown below.
Page 17: When Connecting With A Hdmi Cable
When connecting with a HDMI cable Connect the digital set-top box to H H D D M M I I / / D D V V I I I I N N 1 1 or H H D D M M I I I I N N 2 2 jack on the set. Turn on the digital set-top box.
Page 18: Dvd Setup
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable Connect the video outputs ( Y, P C C O O M M P P O O N N E E N N T T I I N N V V I I D D E E O O jacks on the set. Connect the audio outputs of the DVD to the C C O O M M P P O O N N E E N N T T I I N N A A U U D D I I O O jacks on the set.
Page 19: When Connecting With An S-Video Cable
ANTENNA When connecting with a Euro Scart PCMCIA CARD SLOT Connect the Euro scart socket of the DVD to the A A V V 1 1 Euro scart socket on the set. Turn on the DVD player, insert a DVD. Select AV1 input source with using the I I N N P P U U T T button on the remote control.
Page 20: Insertion Of Ci Module
AV 1 AV 2 EXTERNAL EQUIPMENT SETUP AUDIO When connecting HDMI cable HDMI IN 2 AV 1 HDMI1 VIDEO AUDIO NOTE INSERTION OF CI MODULE AV 2 HDMI2 P P C C M M C C I I A A C C A A R R D D S S L L O O T T AV IN 3 PCMCIA...
Page 21: Vcr Setup
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of PCMCIA EJECT the screen may remain visible on the screen.
Page 22 EXTERNAL EQUIPMENT SETUP When connecting with a Euro Scart CARD SLOT Connect the Euro scart socket of the VCR to the A A V V 1 1 Euro scart socket on the set. AV 1 HDMI IN 2 Insert a video tape into the VCR and press PLAY on the VCR.
Page 23: Digital Audio Out Setup
AV 1 HDMI IN 2 When connecting with an S-Video cable VIDEO AUDIO Connect the S-VIDEO output of the VCR to the S S - - V V I I D D E E O O input on the set. The picture quality is improved;...
Page 24 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP S-VIDEO AV IN 3 Connect the A A U U D D I I O O /V V I I D D E E O O jacks between TV and external equipment. Match the jack colors. ( Video = yellow, Audio Left = white, and Audio Right = red ) Select AV3 input source with using the I I N N P P U U T T button on the remote control.
Page 25: Pc Setup
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable Connect the RGB output of the PC to the R R G G B B ( ( P P C C ) ) jack on the set.
Page 26 NOTE To enjoy vivid picture and sound, connect a PC to the set. Avoid keeping a fixed image on the set’s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
Page 27 Supported Display Resolution RGB[PC] / HDMI[PC] mode Horizontal Vertical Resolution Frequency(KHz) Frequency(Hz) 720x400 31.468 70.08 31.469 59.94 640x480 37 .684 75.00 37 .879 60.31 800x600 46.875 75.00 832x624 49.725 74.55 48.363 60.00 1024x768 56.476 70.00 60.123 75.029 1280x768 47 .78 59.87 1360x768 47 .72...
Page 28: Screen Setup For Pc Mode
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Auto Configure (RGB [PC] mode only) Automatically adjusts picture position and minimizes image shaking.After adjustment, if the image is still not correct, your set is functioning properly but needs further adjust- ment. A A u u t t o o c c o o n n f f i i g g u u r r e e This function is for the automatic adjustment of the screen position, clock, and phase.
Page 29 Adjustment for screen Phase, Clock, Position If the picture isn’t clear after auto adjustment and espe- cially if characters are still trembling, adjust the picture phase manually. To correct the screen size, adjust C C l l o o c c k k . This function works in the following mode : RGB[PC].
Page 30: Selecting Wide Xga Mode
EXTERNAL EQUIPMENT SETUP Selecting Wide XGA mode To see a normal picture, match the resolution of RGB mode and selection of XGA mode. This function works in the following mode: RGB[PC] mode Press the MENU button and then use to select the SCREEN menu. Press the button and then use select XGA Mode.
Page 31: Reset To Original Factory Settings
Initializing (Reset to original factory settings) This function operates in current mode. To initialize the adjusted value It’s not available to use ISM Method and Low power in L L C C D D T T V V models. Press the MENU button and then select the OPTION menu.
Page 32: Remote Control Key Functions
WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT MODE POWER TV/RADIO INPUT BRIGHT SIMPLINK TEXT RATIO I/II BACK INFO i MENU EXIT GUIDE MUTE LIST Q.
Page 33: Installing Batteries
INPUT MODE POWER TV/RADIO INPUT BRIGHT SIMPLINK TEXT RATIO I/II BACK INFO i MENU EXIT GUIDE MUTE LIST Q. V I E W UPDATE INDEX TIME SLEEP HOLD REVEAL SUBTITLE MODE Selects the remote operating modes. See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.
Page 34: Turning On The Tv
WATCHING TV /PROGRAMME CONTROL TURNING ON THE TV - If your TV will be turned on, you will be able to use its features. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the r r / I, INPUT or button on the TV or press the POWER, INPUT, D/A, PR + or - or NUMBER button on the remote control and then the TV will switch on.
Page 35: Programme Selection
PROGRAMME SELECTION Press the P P R R + + or - - or NUMBER buttons to select a pro- gramme number. VOLUME ADJUSTMENT Press the VOL + + or - - button to adjust the volume. If you want to switch the sound off, press the MUTE button.
Page 36 Press the M M E E N N U U button and then Press the button and then Change the setting of an item in the sub or pull-down menu with You can move to the higher level menu by pressing the O O K K or M M E E N N U U button. SETUP Auto Tuning PICTURE...
Page 37: Auto Programme Tuning
AUTO PROGRAMME TUNING (IN DIGITAL MODE) Use it to automatically find and store all of the programmes. When you start auto programming in digital mode, all the stored service information will be deleted. Press the MENU button and then select the SETUP menu. Press the button and then Auto Tuning.
Page 38: Manual Programme Tuning
WATCHING TV /PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) Manual Tuning lets you manually add a programme to your programme list. Press the MENU button and then select the SETUP menu. Press the button and then Manual Tuning. Press the button and then BER buttons to select the desired channel number.
Page 39: Programme Edit
PROGRAMME EDIT (IN DIGITAL MODE) When a programme number is skipped, it means that you will be unable to select it using PR + or - button during TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu.
Page 40 WATCHING TV /PROGRAMME CONTROL Skipping a programme number Select a programme number to be skipped with the Press the BLUE button. The skipped programme number turns to blue. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that you will be unable to select it using the PR + or - but- ton during normal TV viewing.
Page 41 5V ANTENNA POWER (IN DIGITAL MODE ONLY) Even if there isn’t a special 5V adapter power in the external antenna, this function can output 5V in the set. Press the MENU button and then select the SETUP menu. Press the button and then use select 5V Antenna Power...
Page 42: Software Update
WATCHING TV /PROGRAMME CONTROL SOFTWARE UPDATE (IN DIGITAL MODE ONLY) Software Update means software can be downloaded through the digital terrestrial broadcasting system. Press the MENU button and then select the SETUP menu. Press the button and then Software update. Press the button and then Off or On.
Page 43 Programme Edit 5V Antenna Power Software Update Diagnostics To Set CI Information Engineering Diagnostics Channel 30 Manufacturer : LG Electronics Inc. Transmitter : Teracom_Mux_2 Model / Type : 37LC2D-EC Signal strength Serial No. : 604KG0000006 Software version : 1.1.0 Signal quality...
Page 44 WATCHING TV /PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY) This function enables you to watch some scrambled services (pay ser- vices). If you remove the CI Module, you can’t watch the pay services. When the module is inserted to CI slot, you can access the module menu. To purchase a module and smart card, contact your supplying dealer.
Page 45 AUTO PROGRAMME TUNING (IN ANALOGUE MODE) All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installa- tion of this set. Press the M M E E N N U U button and then select the SETUP menu.
Page 46 WATCHING TV /PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) Manual Tuning lets you manually tune and arrange the sta- tions in whatever order you desire. Press the MENU button and then select the SETUP menu. Press the button and then Manual Tuning.
Page 47: Assigning A Station Name
FINE TUNING (IN ANALOGUE MODE) Normally fine tuning is only necessary if reception is poor. Press the MENU button and then select the SETUP menu. Press the button and then Manual Tuning. Press the button and then Fine. Press the button and then tune for the best picture and sound.
Page 48 WATCHING TV /PROGRAMME CONTROL PROGRAMME EDIT (IN ANALOGUE MODE) This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. Press the MENU button and then select the SETUP menu.
Page 49 Moving a programme Select a programme to be moved with Press the YELLOW button. Move the programme to the desired programme number with the Press the YELLOW button again to release this function. Skipping a programme number Select a programme number to be skipped with Press the BLUE button.
Page 50: Calling The Programme Table
WATCHING TV /PROGRAMME CONTROL CALLING THE PROGRAMME TABLE You can check the programmes stored in the memory by displaying the programme table. Displaying programme LIST Press the LIST button to display the PROGRAMME LIST menu. The programme list appears on the screen. •...
Page 51: Input Label
Press the button and then use select the OPTION menu. Press the button and then use Input Label. Press the button and then use the source: AV1, AV2, Comp., RGB, HDMI1 or HDMI2. Press the button to select the label. Press button to return to normal TV viewing.
Page 52 WATCHING TV /PROGRAMME CONTROL This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. If you do not want SIMPLINK menu, select “Off”.
Page 53 SIMPLINK Functions D D i i s s c c p p l l a a y y b b a a c c k k Control connected AV devices by pressing the buttons. D D i i r r e e c c t t P P l l a a y y After connecting AV devices to TV, you can directly control the devices and play media without additional settings.
Page 54: Picture Control
PICTURE CONTROL EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services.
Page 55: Button Function In 8 Days Guide Mode
Button Function in NOW/NEXT Guide Mode Remote Control Buttons Function Change EPG mode YELLOW Enter Timer Record/Remind setting mode BLUE Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme PR + or - Page Up/Down GUIDE/EXIT Switch off EPG...
Page 56: Button Function In Extended Description Box
PICTURE CONTROL Button Function in Extended Description Box Remote Control Buttons Function Text Up/Down YELLOW Enter Timer Record/Remind setting mode INFO i The detail information on or off GUIDE/EXIT Switch off EPG Button Function in Record/Remind Setting Mode - This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable.
Page 57 PICTURE SIZE (ASPECT RATIO) CONTROL You can watch the screen in various picture formats; O O r r i i g g i i n n a a l l , 4 4 : : 3 3 , 1 1 6 6 : : 9 9 , 1 1 4 4 : : 9 9 and Z Z o o o o m m 1 1 / / 2 2 . If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible.
Page 58 PICTURE CONTROL • 1 1 6 6 : : 9 9 Following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). • 1 1 4 4 : : 9 9 You can enjoy the picture format of 14:9 or general TV programme through the 14:9 mode.
Page 59: Preset Picture Settings
PRESET PICTURE SETTINGS Picture Mode-Preset D D y y n n a a m m i i c c Select this option to display with a sharp image. S S t t a a n n d d a a r r d d The most general and natural screen display sta- tus.
Page 60 PICTURE CONTROL Auto Colour Tone Control (Warm/Medium/Cool) To initialize values (reset to default settings), select the Cool option. Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. It’s available to use this function in User mode.
Page 61: Manual Picture Adjustment
MANUAL PICTURE ADJUSTMENT Picture Mode-User option C C o o n n t t r r a a s s t t Adjusts the difference between the light and dark levels in the picture. B B r r i i g g h h t t n n e e s s s s Increases or decreases amount of white in the your picture.
Page 62 PICTURE CONTROL Colour Tone - User option To adjust red, green, blue to any colour temperature you prefer. Press the M M E E N N U U button and then the PICTURE menu. Press the button and then Colour Temperature Press the button and then Press the...
Page 63 XD - PICTURE IMPROVEMENT TECHNOLOGY XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal pro- cessing algorithm. It’s not available to use this function in RGB-PC mode. Press the MENU button and then the PICTURE menu.
Page 64 PICTURE CONTROL DEMO Use it to see the difference between XD Demo on and XD Demo off. It’s not available to use this function in RGB[PC], HDMI[PC] mode. Press the MENU button and then the PICTURE menu. Press the MENU button and then XD Demo.
Page 65 ADVANCED - CINEMA Set up the TV for the best picture appearance for viewing movies. This feature operates only in TV, AV, S-Video and Component 480i/576i mode. Press the M M E E N N U U button and then the PICTURE menu.
Page 66 PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the bright- ness of the screen using the black level of the screen. This function works in the following mode: AV (NTSC-M), S- Video (NTSC-M) or HDMI.
Page 67: Picture Reset
PICTURE RESET Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced at the factory. Press the M M E E N N U U button and then the PICTURE menu. Press the button and then Picture Reset Press the button to initialize the adjusted value.
Page 68 PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time.
Page 69: Low Power
LOW-POWER PICTURE MODE This is the function to reduce the power consumption of the set. It’s not available to use this function in LCD TV models. Press the MENU button and then select the OPTION menu. Press the button and then Factory Mode.
Page 70: Sound & Language Control
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER AVL automatically keeps on an equal volume level even if you change programmes. Press the MENU button and then select the AUDIO menu. Press the button and then Auto Volume. Press the button and then Off or On.
Page 71: Preset Sound Settings-Sound Mode
PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. Sound Mode lets you enjoy the best sound without any Special adjustment because the TV sets the appropriate sound options based on the programme content.
Page 72: Sound Setting Adjustment -User Mode
SOUND &LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE Adjust the sound equalizer. Press the M M E E N N U U button and then the AUDIO menu. Press the button and then Sound Mode Press the button and then Press the button.
Page 73: Balance
BALANCE You can adjust the sound balance of speaker to the levels you prefer. Press the MENU button and then select the AUDIO menu. Press the button and then Balance. Press the button and then desired adjustment. Press the EXIT button to return to normal TV viewing. button to button to select button to make...
Page 74: Tv Speakers On/ Off Setup
SOUND &LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP You can adjust the internal speaker status. In AV1, AV2, AV3, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, TV speaker and/or variable audio can be outputted even though there is no video signal. If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
Page 75: Selecting Digital Audio Out
SELECTING DIGITAL AUDIO OUT This function lets you select your preferred Digital Audio Output. The set can output Dolby Digital in a channel only which broadcast Dolby Digital Audio. When it’s applied the Dolby Digital format, if you select Dolby Digital on Digital audio out menu, SPDIF Output will be out- putted Dolby Digital.
Page 76: I/Ii
SOUND &LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast Mono Stereo Dual M M o o n n o o s s o o u u n n d d s s e e l l e e c c t t i i o o n n If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I I / / I I I I button twice.
Page 77: Nicam Reception (In Analogue Mode Only)
NICAM Reception (In Analogue Mode Only) If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by press- ing the I/II button repeatedly.
Page 78: On-Screen Menu Language/Country Selection
SOUND &LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION Installation guide menu appears on TV screen when it is turned on for the first time. Press the button to select your desired language. Press the button and then, O O K K button to select your country.
Page 79: Language Selection (In Digital Mode Only)
LANGUAGE SELECTION (IN DIGITAL MODE ONLY) A A u u d d i i o o function lets you select your preferred language for audio. If the audio data in selected language is not broadcasted, default lan- guage audio will be played. Use S S u u b b t t i i t t l l e e function when two or more subtitle languages are broadcasted.
Page 80: Time Setting
TIME SETTING CLOCK SETUP The clock is set automatically when receiving the digital signal. (You can set the clock if the TV has no DTV signal.) You must set to the time correctly before using on/off time function. Press the MENU button and then select the TIME menu.
Page 81: Auto On/Off Timer Setting
AUTO ON/OFF TIMER SETTING The Off time automatically switches the set to standby at the preset time. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.
Page 82: Auto Shut-Off Setting
TIME SETTING AUTO SHUT-OFF SETTING If set to on and there is no input signal, the set turns off auto- matically after 10 minutes. Press the MENU button and then select the TIME menu. Press the button and then Auto Sleep. Press the button and then Off or On.
Page 83: Time Zone Setup
TIME ZONE SETUP When you select a Time Zone city, TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) information which is received to broadcasting signal when time is set automatically by a digital signal. Press the MENU button and then select the TIME menu.
Page 84: Parental Control / Ratings
PARENTAL CONTROL / RATINGS SET PASSWORD & LOCK SYSTEM If you first enter the password, press ‘0’ , ‘0’ , ‘0’ , ‘0’ on the remote control handset. Press the MENU button and then select the OPTION menu. Press the button and then Lock System.
Page 85: Parental Control
PARENTAL CONTROL This function operates according to information from the broadcasting station. Therefore if the signal has wrong information, this function dose not operates. Lets you set up blocking schemes to block specif- ic channels, ratings, and external viewing sources. A password is required to gain access to this menu.
Page 86: Teletext
TELETEXT T T h h i i s s f f e e a a t t u u r r e e i i s s n n o o t t a a v v a a i i l l a a b b l l e e i i n n a a l l l l c c o o u u n n t t r r i i e e s s . . Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics.
Page 87: Fastext
FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the correspond- ing coloured button. Page selection Press the button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
Page 88: Digital Teletext
DIGITAL TELETEXT *This function works in UK only. The set gives you access to a digital teletext which is greatly improved in various aspects such as text, graphics and so on. This digital teletext can be accessed by special digital teletext services and specific services which broadcast digital teletext.
Page 89: Appendix
APPENDIX TROUBLESHOOTING T T h h e e o o p p e e r r a a t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k n n o o r r m m a a l l l l y y . . Check to see if there is any object between the product and the remote control causing obstruction.
Page 90 APPENDIX T T h h e e a a u u d d i i o o f f u u n n c c t t i i o o n n d d o o e e s s n n o o t t w w o o r r k k . . Picture OK &...
Page 91: Maintenance
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen Here’s a great way to keep the dust off your screen for a while.
Page 92: Product Specifications
10.7 kg / 23.6 lbs AC100-240V~ 50/60Hz 1.3A AC100-240V~ 50/60Hz 1.5A 130W 150W 32LC5 * 26LC5 * 32LC55-ZA 26LC55-ZA 32LC56-ZC 676.4 x 529.2x 221.0 mm 806.6 x 606.5 x 249.0 mm 927 .0 x 692.8x 280.5mm 26.7 x 20.9 x 8.7 inches 31.8 x 23.9 x 9.8 inches...
Page 93 MODELS with stand Dimensions (Width x Height x Depth) without stand with stand Weight without stand Power requirement Power Consumption Television System Program Coverage External Antenna Impedance Operating Temperature Operating Humidity Environment condition Storage Temperature Storage Humidity The specifications shown above may be changed without prior notice for quality improvement. 42PC5 * 50PC5 * 42PC55-ZB...
Page 94: Programming The Remote Control
APPENDIX PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-con- trollable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode Test your remote control.
Page 95 JENSEN 012 031 033 043 048 050 055 060 130 150 152 KENWOOD 014 034 039 043 047 048 LG (GOLDSTAR) 001 012 013 020 101 106 1 14 123 LLOYD 003 009 013 014 017 034 101 106 MAGIN...
Page 96: Ir Codes
APPENDIX IR CODES 1. How to Connect Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes Output waveform Single pulse, modulated with 37 .917KHz signal at 455KHz Configuration of frame 1st frame Lead code Low custom code C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7...
Page 97 C C o o d d e e ( ( H H e e x x a a ) ) F F u u n n c c t t i i o o n n PR + + PR - - VOL + + VOL - - Up (...
Page 98: External Control Device Setup
APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel.
Page 99: Set Id
Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. p p . . 1 1 0 0 1 1 Press the M M E E N N U U button and then use to select the O O P P T T I I O O N N menu.
Page 100: Communication Parameters
APPENDIX Communication Parameters Baud rate : 9600 bps ( UART ) Data length : 8 bits Parity : None Command Reference List COMMAND 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07 .
Page 101 0 0 1 1 . . P P o o w w e e r r ( ( C C o o m m m m a a n n d d 2 2 : : a a ) ) To control Power On/Off of the set.
Page 102 APPENDIX 0 0 9 9 . . C C o o l l o o u u r r ( ( C C o o m m m m a a n n d d 2 2 : : i i ) ) To adjust the screen colour.
Page 103 1 1 9 9 . . A A b b n n o o r r m m a a l l S S t t a a t t e e ( ( C C o o m m m m a a n n d d 2 2 : : z z ) ) To recognize an abnormal state.
Page 104 APPENDIX 2 2 2 2 . . A A u u t t o o C C o o n n f f i i g g u u r r e e ( ( C C o o m m m m a a n n d d 1 1 : : j j , , C C o o m m m m a a n n d d 2 2 : : u u ) ) To adjust picture position and minimize image shaking automatically.

This manual is also suitable for:

42lc45 32lc52 26lc4 series 26lc5 series 32lc4 series 32lc5 series ... Show all

LG 32LC55 Owner's Manual

Sound & Language Control

Digital Teletext

Appendix

Quick Links

Related Manuals for LG 32LC55

Summary of Contents for LG 32LC55

This manual is also suitable for:

Table of Contents