Accessories; Stand Installation For 32Lc2D/2Db - LG 42LC2D Series Owner's Manual

ACCESSORIES

Ensure that the following accessories are included with your set. If any accessory is missing, please contact
the dealer from where you purchased the set.
Power Cord
75Ω RF Coaxial
For 42PC1D *, 50PC1D *
2-Wall brackets
2-eye-bolts
For 32/37/42LC2D
2-TV brackets
2-Wall brackets

Stand Installation for 32LC2D/2DB *

1
Carefully place the set screen side down on a
cushioned surface that will protect set and screen
from damage.
2
Place the hook of the stand in the back of the
set as shown.
3
Install the 4 bolts provided securely, in the back of
the set.
Owner's Manual
Owner's Manual Remote Control /
2-bolts for stand assembly
(Refer p.1 1)
(42PC1D * only)
32/37/42LC2DB
*, *
Cable
2-bolts
Management
Polish the screen with the cloth.
Slightly wipe stained spot on the exterior
only with the cleansing cloths for the
product exterior if there is stain or finger-
print on surface of the exterior.
Do not wipe roughly when removing
Batteries
stain. Please be cautious of that excessive
power may cause scratch or discoloration.
Twister Holder
Arrange the wires
with the twister holder.
Polishing Cloth
(except 32LC2D/ 2DB * )
4-bolts (32LC2D/2DB * only)
See below for detail
information.
1